in-dash monitor wiring?

hello everyone, welcome to stupid question time! i just purchased a innovatek in-703L in-dash monitor for my 1999 civic sir coupe. too bad the instructions for wiring are notthat great. i was curious if anyone could help me out with the wiring on this matter, i am supplying ALL the info i can give everyone about the wires. power supply 12v (has inline fuse)= RED accumulator 12v (clock) yellow (which i assume is the same as the yellow for a cd player "memory") black ground wire mint green wire the instructions say "ground with black & green wire" so. . . does that mean to ground both the green & black in the same location? what about the ebrake line??? are there any suggestions on the best location for the power wire & the accumulator wire? thank you in advance

The green wire I will assume is your (-) input for the parking brake wire so that if this wire doesn't see a ground, the video will not work. To grab the constant wire ( YELLOW ) go to the BLUE/WHITE ( or WHITE/ BLUE, I can't remember but make sure that you check with a DMM or light tester ) wire on the wiring harness on the radio and the IGNITION wire you can grab the radio and the color is YELLOW/REDJeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

it's blue/white out of the radioBad Boys Customs

    audio - video - security

If you use it. Suport it. Donate to the 12 volt!

I say constant is WHITE/ blue with 2 silver tracers.Certified Security Specialist

Always check info with a digital multimeter.

I promise to be good.

Tell Darwin I sent you.

I've been sick lately, sorry I won't be on much.