Swap AVIC-N1 for a N2 or D1

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / Swap AVIC-N1 for a N2 or D1 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

avking

Member - Posts: 6

Joined: September 04, 2005

Location: United States

Posted: September 04, 2005 at 11:01 PM / IP Logged

I want to swap my AVIC-N1 for either a N2 or D1. I had the N1 installed by a local install shop. I have the interfaces for Onstar and GM Chimes installed. I also had the XM installed. Does the N2 and/or D1 use the sames harness as the N1? Can I just pop the unit out and pop in the new one? If I have to change a couple wires around, I can do that. If it will require to re-wire everything because of a new harness, I am just going to skip it. Thanks.

Back to Top

whtcrxghst

Copper - Posts: 210

Joined: August 05, 2005

Posted: September 06, 2005 at 1:16 PM / IP Logged

N2 uses the same wiring. You will have to access the hide-away box and switch that too though

Back to Top

gt9450

Member - Posts: 2

Joined: October 12, 2005

Location: United States

Posted: October 23, 2005 at 1:12 PM / IP Logged

the d1 and the n2 wire hardness is not the same.

Back to Top

xtremeaudio

Copper - Posts: 174

Joined: August 30, 2004

Location: United States

Posted: October 25, 2005 at 4:00 AM / IP Logged

avic-1 and avic-n2 they are the same on wiring harness avic-d1 it not the same and don't play dvd you will need to add on dvd

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Swap AVIC-N1 for a N2 or D1

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.