jensen vm-9511

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / jensen vm-9511 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

crownman

Member - Posts: 5

Joined: February 24, 2006

Location: United States

Posted: July 11, 2006 at 11:52 PM / IP Logged

I have purchased a head unit (vm9511) and installed it everything works except i

get no sound when in dvd/cd/tv/ or sd mode. In radio mode I do get sound. Is this a

common thing? Can you get me through this problem?

Any help will do thanks.

losinstallerdum

josh1979

Silver - Posts: 320

Joined: July 03, 2006

Location: United States

Posted: July 12, 2006 at 12:03 AM / IP Logged

does the radio turn on amps? i so you may have used the power antenna wire to turn on the amp. in most cases the power antenna wire on the radio will be blue amp turn on will be blue w/ white stripe. check this if all is not well or you dont have amps even a factory one let me know what kind of car you have ,year, make, and model.

bring back the rotary phone so i dont have to press 1 to proceed in english

black78ta

Member - Posts: 31

Joined: April 13, 2005

Location: United States

Posted: July 12, 2006 at 1:00 AM / IP Logged

Yeah, it sounds like you aren't turning on your factory amp. Whatever wire you have connected to the blue wire coming out of the radio, connect it to the blue/white coming out of the radio and hopefully that should fix your problem.

crownman

Member - Posts: 5

Joined: February 24, 2006

Location: United States

Posted: July 12, 2006 at 9:40 PM / IP Logged

thanks will check the wires. i have an 1999 chrysler lhs. now ,i do get some sound from it when the radio plays just not from any other mode.

losinstallerdum

cntrylvr79

Silver - Posts: 582

Joined: July 02, 2005

Location: United States

Posted: July 12, 2006 at 10:32 PM / IP Logged

e you have the amp turn on from the jensen hooked up to the power antenna lead of the chrysler harness.

Cause I'm So white and nerdy...

First Class Certi-fried installer

crownman

Member - Posts: 5

Joined: February 24, 2006

Location: United States

Posted: July 14, 2006 at 7:56 PM / IP Logged

thanks fellas, it was the blue wire i had wrong . there is something else . there is only one rca for the sub

not gettin signal to subs

losinstallerdum

ferretvw

Copper - Posts: 188

Joined: September 29, 2005

Location: Pennsylvania, United States

Posted: July 15, 2006 at 5:31 PM / IP Logged

Yeah Jensen In-Dash units only have one RCA for the subwoofer just get a y adapter to split it and it will be taken care of. Also, the Jensen CD players you need to actually turn on the sub output on the radio in one of the menu's dont know if this applies to the IN-Dash as well but it is worth a glance at the manual at least.

crownman

Member - Posts: 5

Joined: February 24, 2006

Location: United States

Posted: July 16, 2006 at 2:55 PM / IP Logged

thanks ,will try .

losinstallerdum

crownman

Member - Posts: 5

Joined: February 24, 2006

Location: United States

Posted: July 20, 2006 at 11:29 PM / IP Logged

got it working thanks alot

losinstallerdum

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

jensen vm-9511

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.