AVIC N1 Touch Panel calibration

2 thing you can try is http://www.avic411.com  and /or call 1800pioneer and ask for tech supportbring back the rotary phone so i dont have to press 1 to proceed in english

Searched that message board already.  Also, I called tech support earlier, and they told me it's a $200 minimum charge to service my head unit.

You can calibrate it by going into the calibration sub menu. Go into "set up touch panel effective range. Once your in that menu, take a stylus from a PDA or something with a soft tip and trace the ENTIRE outer edge of the screen. This gives the system the parameters of your screen. when your done with that, use the back or "OK" button on your remote and it will kick you back to the calibration sub menu...go into set up calibration menu and do the set up. When you have touched the last test icon it will take you back out to the sub menu...your done. Turn it off and on and try it out.The Hog