the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

Kenwood 617 DVD/KNA-G510 Nav


Post ReplyPost New Topic
< Prev Topic Next Topic >
shawncav 
Member - Posts: 2
Member spacespace
Joined: December 01, 2006
Location: United States
Posted: December 05, 2006 at 9:12 PM / IP Logged  

I installed the pnav system from Kenwood in my 2003 jeep liberty. (KVT 617 DVD / KNA-G510 Everything works great except for the nav unit.  It doesnt work at all in Manhattan.  Once i get close to manhattan, it loses the signal.  Once I leave manhattan, the signal comes back and the unit works fine.  I have tried to mount the antenna inside the car, and outside the car.  Either way I get no signal in/around manhattan.  The VSS wire has not been connected as of yet because I do not know where it is!.  Kenwood Tech says it shouldnt affect it for my reasons.  Any ideas??  Any help would be appreciated.

lijlaudioli 
Member - Posts: 1
Member spacespace
Joined: December 14, 2006
Location: United States
Posted: December 14, 2006 at 8:46 AM / IP Logged  
its not the antenna or the install.. ive had the same problem with my alpine unit down here in atlanta... the GPS satellite doesnt link correctly.... the speed sensor wire doesnt have anything to do with the actuall signal but it is a CRUCIAL wire to be installed. that tells the navagation what speed you are going so that the nav can calculate how long it takes to get to your destination. i can get that
also, do you by any chance have the wiring diagram for the KVT-617DVD, i just got one for 200 bux and i dont know what wires go to what
email me at lijlaudioli@yahoo.com
rjones4876 
Member - Posts: 15
Member spacespace
Joined: November 01, 2005
Location: United States
Posted: December 23, 2006 at 12:53 PM / IP Logged  
No, actually the kenwood unit doesn't use a VSS at all.  In fact, there is not VSS wire in the harness
techienerd 
Member - Posts: 9
Member spacespace
Joined: February 12, 2007
Posted: February 20, 2007 at 11:44 PM / IP Logged  
I had the same issue with my Kenwood in Chicago. lijlaudioli is right, the problem has nothing to do with either the install or the antenna.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer