navigation issue

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / navigation issue (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

allencass

Member - Posts: 37

Joined: June 17, 2005

Location: Massachusetts, United States

Posted: February 19, 2007 at 4:27 PM / IP Logged

Hi,

I have the jensen vm9511ts with the nav unit and xm installed. I had the nav unit installed last week. here is my issue. when i turn the car off, the nav unit will not work once i turn the car back on unless i unplug the xm box from the multimedia center andplug it back in. any ides?

Thanks

Allen

ferretvw

Copper - Posts: 188

Joined: September 29, 2005

Location: Pennsylvania, United States

Posted: February 19, 2007 at 8:41 PM / IP Logged

If it is powered with a constant move it to an accy. even if it says constant. We used to have this problem with some sony direct connect satellite radios changing them to accy's helped on all of them if I remember correctly.

2008 Scion xB

Pioneer AVIC-D3

RF 3Sixty.2 sound processor

Stock speakers (for now ;))

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

navigation issue

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.