kenwood kna dv4100

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / kenwood kna dv4100 (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

luisandres58

Member - Posts: 6

Joined: September 14, 2003

Posted: March 07, 2007 at 8:37 PM / IP Logged

I don't know if this was already discussed here. I tried to search. Didn't get enough info. I'm trying to hook up the Kna-dv4100 in a 1984 Jeep Grand Cherokee. I got the wire (VSS from the Trammy, color WHITE/ orange,etc.) But where do you tap into it ,close to the firewall?. Also where to tap the reverse wire. Any detailed info. Thanx.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 08, 2007 at 8:03 AM / IP Logged

You can tap into the VSS wire anywhere you want as long as the wire gives you a signal when the vehicle is in motion. The reverse wire will most like be tapped into in the loom of wires running along the driver's door sill and the wire color you can get from removing the tail light assembly and looking at what color the wire is at the bulb.

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

luisandres58

Member - Posts: 6

Joined: September 14, 2003

Posted: March 13, 2007 at 9:50 PM / IP Logged

___________________________________________

Hi, Jeff.

Would the VSS wire be behind the speedometer dial behind the dashboard? Is kind of hard to be looking under the hood. Does it followed the same color pattern from trammy harness to the dashboard? Thanx.

luisandres58

Member - Posts: 6

Joined: September 14, 2003

Posted: May 07, 2007 at 9:58 PM / IP Logged

Sorry guys! But checking back, I've being away for a while, I put the wrong year. It's a 1994 JGC, not a 1984. If everyone can forgive me and give me some feedback. I'm planning to install it soon, as it's getting warm in NY now. Thankx. kenwood kna dv4100 -- posted image.

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

kenwood kna dv4100

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.