the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2000 volvo s40 vss wire


Post ReplyPost New Topic
< Prev Topic Next Topic >
charliehorse 
Member - Posts: 3
Member spacespace
Joined: April 15, 2007
Location: United States
Posted: April 17, 2007 at 12:27 AM / IP Logged  
I am installing a JVC nx-5000 and need to locate the vss wire. Please help me to find the color and location of this wire.
Thanks!
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: April 17, 2007 at 8:42 AM / IP Logged  
I don't see anything for 2000 but 2001 is green in the radio harness.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
charliehorse 
Member - Posts: 3
Member spacespace
Joined: April 15, 2007
Location: United States
Posted: April 17, 2007 at 10:21 AM / IP Logged  
I have accounted for all the wires in the radio wire harness and don't believe a speed sensor wire is in this harness. My wiring diagram shows that it could be a y/r wire possibly coming off the ECM Engine Control Module. However I do not find a y/r wire in the terminal 3 position. It does have cruise control so I know it has a Vehicle speed sensor wire.
Has anyone done this install on a 2000 Volvo S40?
extreme1 
Silver - Posts: 1,070
Silver spacespace
Joined: February 12, 2003
Location: Canada
Posted: April 17, 2007 at 11:28 AM / IP Logged  
the other option is going to the back of the instrument cluster and look for the wire you were trying to find at the ecm.
Shaughn Murley
Install Manager, Dealer Services
Visions Electronics
Red Deer, Alberta
Bnluis 
Silver - Posts: 578
Silver spacespace
Joined: December 24, 2002
Location: New York, United States
Posted: April 17, 2007 at 12:53 PM / IP Logged  

PIN B15  Yellow /red behind the cluster , Also pin B4 is green if the wire is there that is tha wire that goes to the radio harness.

The yellow / red wire can also be found at other location one of them Being easy to reach at the ECC Control Module A/C contol assembly)  yellow/red pin 4

Luis
Sound Waves
Is up to the installer to test all wires with a DMM whenever possible.
charliehorse 
Member - Posts: 3
Member spacespace
Joined: April 15, 2007
Location: United States
Posted: April 18, 2007 at 10:05 PM / IP Logged  
Thank you for the response!! I will be working on it again this weekend.
Thanks for the help!

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, May 10, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer