pyle lcd w/no input connectors

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / pyle lcd w/no input connectors (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

krmass25

Member - Posts: 3

Joined: June 26, 2007

Location: United States

Posted: June 26, 2007 at 4:03 PM / IP Logged

this is the problem I face...

I am an MECP certified installer looking for a little help wiring up this pyle model plvwr7200 flip down unit. The flip down has been eliminated and I am left with a screen and a wire bundle at the top. I just need to know what the wires are so that I can splice some rca inputs etc to it. I am trying to use this screen for a backup camera monitor for right now. These are the wires I am faced with:

Bare wire (guessing it is ground)

Thicker red

Thinner red

White

Black

Yellow

If I could just figure out what is what I could wire up some connectors and plug in the camera. Thanks for your help and home this isn’t asking too much. Thanks – Kurt Massey < color=#666666>krmass25@verizon.net

[URL] https://i191.photobucket.com/albums/z252/krmass25/DSC00305.jpg[/URL]

[URL] https://i191.photobucket.com/albums/z252/krmass25/DSC00303.jpg[/URL]

Back to Top

krmass25

Member - Posts: 3

Joined: June 26, 2007

Location: United States

Posted: June 26, 2007 at 6:56 PM / IP Logged

anyone?

Back to Top

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: June 26, 2007 at 7:40 PM / IP Logged

Is the thicker red wire a shielded cable?

Back to Top

krmass25

Member - Posts: 3

Joined: June 26, 2007

Location: United States

Posted: June 26, 2007 at 8:09 PM / IP Logged

ok figured this much out.... the two larger wires are the main power and ground. I hooked them up to the battery and the screen came on all white pretty much. it looked like when my sega game gear powers on... :) Anyway I know those are that. that leaves 4 more wires. I am confident that that smaller red and black wires are for the audio input. that leaves white and yellow (which are video colors a lot of the time) and aren't there supposed to be two wires for a video connection? I will know when I get my camera won't I? btw the pictures are at the bottom of the post did anyone see them?>?

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

pyle lcd w/no input connectors

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.