avic n2 bypass

Home / the12volt's Install Bay / Mobile Video, GPS, and Navigation / avic n2 bypass (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

bmrwrld7

Member - Posts: 1

Joined: September 14, 2007

Location: Virginia, United States

Posted: September 14, 2007 at 9:46 AM / IP Logged

I tried to bypass my AVIC-N2 last night by creating a jumper for the R197 pins. Unit will no longer power on, the buttons light up for approx. 4 seconds and the screen will come out but by the time it will fully elevate it will turn back off.

I know I've made an ass of myself by doing this so please keep the comments to yourself. I just wanted to see if there was anything i could do or if anyone has run into the same problem??

Back to Top

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: September 14, 2007 at 10:03 PM / IP Logged

All I can say is remove the wires and reset the unit by pressing the small litte dot button on the right side of the detachable face.

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

avic n2 bypass

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.