remote starter 2004 saturn ion

I've been messing with this for a couple days now. I have used the install diagram off this site perfect. Everything works with the remote starter but the starter. When I run it, the ignition and accessories firer up but then no starter. It doesn't even attempt to turn over the car. Could this be because I am not setting the security bypass module corectly? Any other dumb mistakes? Bypass from BYPASSKIT.COM and starter from CARVOX Thanks for any help...

what is the model number of the bypasskit u used?Where theres is a wire there's a way.

It is the Ion specific one. PLXR 01.02.01 The default is the Ion setting and I think I did set the resistor code correctly. I tried doing it2 seperate times.

We need more information from you. If you tell us wire for wire on what you connected to on the PLXR, we can help you find the problem. If it's in the wiring, then we can help you figure out the proper way to wire it, if it's a programming issue, then that is easy to get you on the right track.Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Wires come from green ignition harness Ignition: pink PLXR to blue Ion and pink Remote Start Starter: violet PLXR to violet Remote Start Cut white wire ION: blue PLXR to ECM side                     pink/white to key side Bypass Output: brown PLXR to blue/white Remote Start Accessory: brown ION to access from remote start (orange)