2009 toyota camry se and viper 5901

Home / the12volt's Install Bay / Car Security and Convenience / 2009 toyota camry se and viper 5901 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

thunderplains

Member - Posts: 44

Joined: August 09, 2009

Location: Connecticut, United States

Posted: January 09, 2010 at 7:05 PM / IP Logged

It really seems like the Idatalink takes care of alot and I only have to hook up a hand full of wires to the car? Nice...

I am taking a look now at the kick panel for the defrost

Back to Top

thunderplains

Member - Posts: 44

Joined: August 09, 2009

Location: Connecticut, United States

Posted: January 10, 2010 at 10:40 PM / IP Logged

Q..

After the remote start w/Idatalink, when I get in the car, Do I need to put the key in and turn or just drop it in drive and go?

I think the XK05 made you restart the car.

Back to Top

thunderplains

Member - Posts: 44

Joined: August 09, 2009

Location: Connecticut, United States

Posted: January 11, 2010 at 3:16 PM / IP Logged

Hey Mike, QQ

On the relay wiring, the RS start violet goes to 85 and 12v constant goes to 86, Does that need a high fuse rating like 87 that goes to starter 2? or can I get away with a 5 amp or so fuse?

Back to Top

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: January 11, 2010 at 4:27 PM / IP Logged

5 amp should do it...

Mike M2

Tech Manager

CS Dealer Services

Back to Top

thunderplains

Member - Posts: 44

Joined: August 09, 2009

Location: Connecticut, United States

Posted: January 18, 2010 at 8:59 AM / IP Logged

Crap..

Ran into issue and end of install.. The SE version does not have a "Engine hood courtesy switch" built into it's latch. I have to add the engine hood pin.

How does it wire up to the ADS-LA CA module and my 5901 RS?

Sorry if this is easy, long night, no coffee yet..

Back to Top

thunderplains

Member - Posts: 44

Joined: August 09, 2009

Location: Connecticut, United States

Posted: January 18, 2010 at 9:03 AM / IP Logged

This is how the module is wired now..

ADS yellow hood status output TO 5901 RS in Gray Hood pin switch NO/NC input

Back to Top

05gt

Silver - Posts: 628

Joined: October 30, 2005

Location: British Columbia, Canada

Posted: January 20, 2010 at 1:07 PM / IP Logged

you have to run a hood pin switch out to the engine area

run the grey wire from the viper unit to the hoodpin switch, there is no connection from the idatalink module

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

2009 toyota camry se and viper 5901

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.