the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 Honda Civic Si Sedan Alarm/Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2008 Honda Civic Si Sedan Alarm/Remote Start (Topic Closed Topic Closed)
Welcome Guest :)

Post ReplyPost New Topic
< Prev Topic Next Topic >
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 13, 2010 at 10:19 PM / IP Logged  

its a paging error, as its not receiving anything back.

remove the fuse from the larger harness with more wires (not the thick gauge wires). this will reset the brain, then give it a shot

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
e10tran 
Member - Posts: 41
Member spacespace
Joined: April 11, 2006
Location: United States
Posted: February 14, 2010 at 3:14 PM / IP Logged  
I have tried to pull the fuse and put it back in after waiting 5 minutes & tried the same with the battery. Still no luck. I even tried pulling the battery from the remote, erasing all remotes & then reprogramming them back on. I tried a remote from a different car with the same alarm and still nothing. Do you think it has to do with the brain itself? The alarm was refurbished so that may explain reasoning?
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 14, 2010 at 5:24 PM / IP Logged  
it might not be the brain, rather the antenna. there were many problems with them.
Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
e10tran 
Member - Posts: 41
Member spacespace
Joined: April 11, 2006
Location: United States
Posted: February 15, 2010 at 12:54 AM / IP Logged  
Do you think the 10,000 OHM resistor deal will work? I have read on many threads from different forums about using a resistor or something on one of the wires of the antenna.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 15, 2010 at 7:01 AM / IP Logged  

that was not a real fix issued by DEI. there was no technical bulletin.

Im having the same problem. I installed a clifford 3.3x in a 2010 subary legacy and the remotes dont work half the time.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
e10tran 
Member - Posts: 41
Member spacespace
Joined: April 11, 2006
Location: United States
Posted: February 15, 2010 at 10:42 PM / IP Logged  
Darn these DEI units. I guess well just have to find another way by trial & error. Thanks for your help, I'll see what I can find out, let me know if you figure out a working method.
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: February 16, 2010 at 5:01 PM / IP Logged  

hey e10tran.

go into programming, default the unit AND dump all the remotes from the system. After this, pull the fuses out wait a min. put fuses back.

Start from scratch and reprogram the remotes (ensure the 2way is in CAR 1 mode), then do all feature changes necessary. post back results.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
e10tran 
Member - Posts: 41
Member spacespace
Joined: April 11, 2006
Location: United States
Posted: March 05, 2010 at 1:51 PM / IP Logged  
Tedmond,
I actually tried that too still no luck =/
I tried contacting the seller but still have no response from him. Did you ever find a solution for your clifford 3.3x?
tedmond 
Gold - Posts: 4,610
Gold spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: January 06, 2007
Location: Ontario, Canada
Posted: March 05, 2010 at 5:08 PM / IP Logged  

i am acutally going to figure it out tomorrow.

will post back results.

Ted
2nd Year Tier 1 Medical School
Still installing as a hobby...pays for groceries
Compustar Expert
Page of 4

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 14, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved • Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer