aftermarket or factory alarm?

The battery has a full charge. I will look for the BLACK / YELLOW and BLACK/ white wires. I have already taken the steering wheel cowl off.Always willing to learn something new.

BTW, my first name is Shawn.Always willing to learn something new.

Well, Nice to meet you Shawn. Welcome...M.E.C.P & First-Class

Go slow and drink lots of water...Procrastinators' Unite...Tomorrow!

Thank you Tommy!, I have had some great responses and am working hard to take the recommended steps to resolve my issue. I do appreciate everyone's input.Always willing to learn something new.

Ok, I have taken a look at the wires coming from the ignition switch, and there is a b/y and b/w wire going into a connector. At the other end of the connector, there is a b/y wire but not a b/w wire. The slot in the other end of the connector that matches up with the b/w wire has a plain white wire coming out of it. I didn't find a relay that the wires are going into. What I did find was that there is a second connector, very close to the first one, that also has a b/y wire in it. To sum it up, the wires from the ignition switch goes into a connector and the wires at the male end of that connector goes into another connector. I sure hope this makes sense.Always willing to learn something new.

Can you post a picture of the wiring ?If i Can't Install it    I Don't need it   Joe

The plot thickens. 

Bulldog Security did make a T-Harness for the 1994 Pathfinder ( NIS-2 ).  Some pictures of the ignition wires / connectors would help.

Soldering is fun!

These are the pics that I took of the wiring. , , Always willing to learn something new.

Maybe its just me, but your pics are not working...Kenny

Owner / Technician

KKD Garage LLC

Albany, NY 12205

Let me try this again as I uploaded from my iPhone. If you can't view them this time, I will be happy to email them to someone.Always willing to learn something new.