1999 honda civic door lock / trunk wires

Dear All, I am installing an alarm in my 1999 Honda Civic Saloon. I have the wiring diagram (Courtesy of the 12v.com), but I'm having problems identifying the door lock wires and the trunk wire. I can't find the 'white keyless module' in the driver's kick panel. I have traced two wires on a green connector immediately above the fuse box (GRN/WHT-LOCK & GRN/ORNG - UNLOCK). However when testing these wires with a DMM, I'm not getting any voltage fluctuation upon pulsing the doors, it just stays at 0v. So I'm not sure if these are the correct wires, I'm I testing correctly? Also confused with the trunk wire. I traced a BLUE/BLACK (-)wire at the trunk light. It should rest at +12v with trunk closed and 0v with trunk open. However, I can't get any reading on the DMM. Any thoughts/ advice on how to trace the correct wire for the trunk? Any help will be appreciated, thank you.(;-)

The reason being the 1999 civic saloon was built in the UK for the Euro Market and had a different lock system to the Japanese built 3 door and US built coupe. I've PM'd you.Test before boxing up.

Thanks for the reply Harry. Ok now that explains why I could not find the correct wires. I will have a look for the correct wires again tonight and PM you my findings. Thanks (;-)