Tacoma 2010 and Viper 4706v

Home / the12volt's Install Bay / Car Security and Convenience / Tacoma 2010 and Viper 4706v

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

cherxiong

Copper - Posts: 164

This member has made a donation to the12volt.com. Click here for more info.

Joined: March 09, 2015

Location: Alaska, United States

Posted: April 13, 2015 at 5:34 AM / IP Logged

I don't know Howeii,

Yea, I would think more likely it's me.

I tested the pin hood wire. My DMM doesn't have the 20VDC option like you mentioned. I turned it to 15VDC. I probed the red probe to the the hood pin wire, the black probe to ground. The reading was around 10-11 VDC only.

You mentioned about pulling the H2 plug. I am not sure which one are you talking about. Are you talking about the Chasis Ground?

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: April 13, 2015 at 5:53 AM / IP Logged

The only thing left that I should do is re-flashing the DBALL2 with the

402.TL1 V3.20 (beta)firmware.

What i have in the DBALL2 right now is 402.TL1 V3.19 version.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 13, 2015 at 6:01 AM / IP Logged

The H2 plug and here I have to be slightly caustic and say look at your quick reference guide which comes in the box is the white 24 pin plug.

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: April 13, 2015 at 7:39 AM / IP Logged

If you look at my connections on page 4. I didn't use that pin (H2) of the 24 pin connector. Plugging it out or not does it make any difference?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 13, 2015 at 7:49 AM / IP Logged

I did quote "9. GRAY (-) HOOD PIN INPUT (NC OR NO) CONNECT TO THE PROVIDED HOOD PIN AND ATTACH THE PIN UNDER THE HOOD"

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: April 13, 2015 at 10:08 AM / IP Logged

Okay. If the H2 you mentioned is the pin hood then I did already. plug, unplug a few times already.

I should spray 70% IPA on the remote to see if there is any sticky button like Ted suggested

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: April 13, 2015 at 10:10 AM / IP Logged

It's okay. I think it's time for some Marlboro, Howeii.

Thanks a lot for the time and the helps.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 13, 2015 at 10:17 AM / IP Logged

Actually I only smoke the long ones (100s) since Kent no longer available in Europe!

cherxiong

Copper - Posts: 164

Joined: March 09, 2015

Location: Alaska, United States

Posted: April 13, 2015 at 10:19 AM / IP Logged

I don't smoke, but I will smoke any type with you because of all the helpings.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: April 13, 2015 at 10:20 AM / IP Logged

😆

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.