Automatic window closer, BMW X3

hello please I am still not understand how this: Directed DEI 528T 12V Accessory Pulse Timer works because BLACK/ white and brown to lock wire blue/red. Black and yellow to ground. Red to constant 12V+ Set timer for 15 seconds if electric roof, 10-12 otherwise. which means, BLACK/ white + brown is input and where is the output?Peace and Love

Now I got it.Peace and Love

Hello, please I found the lock wire from my car and its white or WHITE/ yellow. when I test it without lock, its go to ground and when I click lock on the car remote, then it turn to 12 volts for a second then go back to ground. The relay brown and BLACK/ white always 12 volts, then the relay activate, then turn to ground and the car turn to 12 volts and my fuse go out. so we have to found another solution.Peace and Love

You found a motor wire, not relevant. The wire you want is either a blue/red as I stated 4 pages ago or BROWN / yellow, body ECU behind glovebox, 54 pin connector, pin 22.

Go further down and factory alarm.

ok I saw it but that wire is negative and the relay activate to negative and I hope the factory alarm wire BROWN / yellow activate to positivePeace and Love

well I can go and try nowPeace and Love

Try reading it again, ref: factory wire POS (+) try reading what you're posting and then it might occur to you why I told you to see a professional in an earlier thread. You don't read things properly and I can tell you can't or don't test properly either. 4+ pages for a half hour job.

Before I started, I asked BMW garage about that and they said, its impossible to do that. And I said its possible because of what I read from here. That is why I am trying to do it by myself. But I can do it, I hope. Peace and Love