2001 Nissan Micra K11, Installing Alarm

Home / the12volt's Install Bay / Car Security and Convenience / 2001 Nissan Micra K11, Installing Alarm (

Topic Closed)

Welcome Guest :)

Members

< Prev Page Next Page > < Prev Topic Next Topic >

turbazzz

Member - Posts: 32

Joined: August 28, 2016

Posted: August 31, 2016 at 6:55 PM / IP Logged

It's a shame I can't just find these things underneath the steering column.. Unless I pierce each one with a needle? And find them. What do you reckon...

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: August 31, 2016 at 8:05 PM / IP Logged

According to the legend 71 72 are turn indicators And are Left- GREEN/ Black and Right- GREEN/ YELLOW

Door switch is tied to passenger also so you only need the RED / Green to alarm.

2001 Nissan Micra K11, Installing Alarm - Page 6 -- posted image.

Here is the link to the whole wiring diagram: Nissan Micra K11 2000-03

turbazzz

Member - Posts: 32

Joined: August 28, 2016

Posted: August 31, 2016 at 8:14 PM / IP Logged

I will have a look again tomorrow or weekend. The door switch is that in a different diagram ?

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: August 31, 2016 at 8:18 PM / IP Logged

Updated previous post to include the door trigger wire. It's in Diagram 6 Legend 14 driver and 93 Passenger.

turbazzz

Member - Posts: 32

Joined: August 28, 2016

Posted: September 01, 2016 at 7:50 AM / IP Logged

Okay I found the door trigger cable underneath the steering column, when I connected the alarm does not work properly, disconnected works fine ???

turbazzz

Member - Posts: 32

Joined: August 28, 2016

Posted: September 01, 2016 at 11:00 AM / IP Logged

Indicator lights work a treat ! Just don't know what to do with the door Switch

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 01, 2016 at 12:04 PM / IP Logged

Oh just track that wire back from your door switch.

turbazzz

Member - Posts: 32

Joined: August 28, 2016

Posted: September 01, 2016 at 12:17 PM / IP Logged

There is three wires which one should I connect

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: September 01, 2016 at 12:35 PM / IP Logged

Test, when the door is open one will go to earth. Set meter to 20VDC, red probe on constant live, black probe to suspect wire, you will get 12.2 or thereabouts when you have the correct wire.

lurch228

Silver - Posts: 1,338

Joined: August 08, 2012

Posted: September 01, 2016 at 2:32 PM / IP Logged

turbazzz wrote:

There is three wires which one should I connect

You found 3 wires that are RED / Green stripe that test (Change state) when door is opened?

Like howie II said when door is closed you will not see any voltage on DMM With one probe connected to known +12v and the other on suspect RED / Green wire. When door is opened you will Read +12v on DMM

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.