enclosure suggestions?

Home / the12volt's Install Bay / Fiberglass, Fabrication, and Interiors / enclosure suggestions? (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

donnie5336

Copper - Posts: 52

Joined: July 27, 2004

Location: United States

Posted: August 09, 2004 at 11:06 PM / IP Logged

What would be the best sounding box to build for a 1996 s-10 blazer. I am going to glass a custom box to fit the back but I dont know if I shoud do sealed, ported, bandpass, etc. Any suggestions? What will sound the best since the box will be in the car with me, not in a trunk?

Donnie

Back to Top

dangerranger96

Copper - Posts: 163

This member has made a donation to the12volt.com. Click here for more info.

Joined: April 05, 2004

Location: United States

Posted: August 09, 2004 at 11:55 PM / IP Logged

sealed especially if you are going to put big subs in the box, otherwise it will be puking subs left and right if it isnt set perfectly

Back to Top

Search for other posts by dangerranger96

CarAudioHelp

Copper - Posts: 198

Joined: July 18, 2003

Location: United States

Posted: August 10, 2004 at 11:16 AM / IP Logged

Sealed is the easiest because they are the most tolerant of incorrect volumes. Ported can be done but are kind of a pain because you have to measure the volume of the enclosure and then 'glass in a port.

I don't recall ever seeing a bandpass box in fiberglass. Anyone else ever seen that attempted?

Back to Top

donnie5336

Copper - Posts: 52

Joined: July 27, 2004

Location: United States

Posted: August 10, 2004 at 12:04 PM / IP Logged

if i do bandpass i'm gonna build it with wood and plexi but i'm gonna FG the edges tomake it custom fit

Donnie

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

enclosure suggestions?

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.