451M on a 04 Intrepid

Home / the12volt's Install Bay / Car Security and Convenience / 451M on a 04 Intrepid (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

thsonnen

Member - Posts: 27

Joined: June 09, 2002

Location: United States

Posted: January 05, 2005 at 11:18 AM / IP Logged

Going to hook up a Rattler remote start on a 2004 Dodge Intrepid. It came with a 451M and a pack of resistors.

I already know that the Intrepid is a one wire unlock and lock system using resistors. My question is how do I hook up the 451M to this?

Back to Top

snguyen

Silver - Posts: 281

Joined: October 09, 2003

Location: United States

Posted: January 05, 2005 at 11:44 AM / IP Logged

https://www.the12volt.com/resistors/resistors.asp

Back to Top

thsonnen

Member - Posts: 27

Joined: June 09, 2002

Location: United States

Posted: January 05, 2005 at 11:27 PM / IP Logged

What I really need is a wiring diagram for the 451M to a single wire door lock system on this vehicle. The 451M did not come with a diagram.

Back to Top

ellasman

Member - Posts: 4

Joined: January 04, 2005

Location: United States

Posted: January 06, 2005 at 2:37 AM / IP Logged

Dude........ are you serious ??? You've installed a remote start system, yet you don't know how to do 1-wire doorlocks ??? What kind of installer are you ???

First find your door lock wire
Your door lock wire will be located at the BCM (The BCM is attached to the back of the junction block, at the driver side end of the dash. The plugs for the BCM face the firewall)
Blue Plug - Pin 5
Lock/Unlock wire: WHITE/ Dk.Green

Now to hook up your 451M relay, this is what you need to do:

Take your purple wire and hook it up to constant 12v
CUT & Tape off the BROWN / Black & WHITE/ Black wires - you won't use them.
On your Green wire you need 2700 ohms of resistance
On your Blue wire you need 620 ohms of resistance
Now once you have attatched your resistors, at the end of them, attatch them both together, making one wire. Connect this one wire to your lock/unlock wire located at your BCM.
Look at Diagram I have provided if you can't figure it out:

The Installation Specialist

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

451M on a 04 Intrepid

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.