2006 Dodge Grand Caravan Remote Start

Home / the12volt's Install Bay / Car Security and Convenience / 2006 Dodge Grand Caravan Remote Start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

mugpar

Copper - Posts: 100

Joined: January 28, 2003

Location: United States

Posted: December 13, 2005 at 8:22 AM / IP Logged

Has anyone done a remote start on a 2006 dodge caravan yet? Do you know if it's the same wiring as the 2005 Dodge Caravan? Thanks

Geeque

Silver - Posts: 310

Joined: October 07, 2003

Location: United States

Posted: December 13, 2005 at 10:30 AM / IP Logged

Should be the same, real pain in the neck!!!!!!!!!!!

Gary Kline

MECP Master Technician

Ravendarat

Platinum - Posts: 2,806

Joined: February 23, 2004

Location: Canada

Posted: December 13, 2005 at 10:41 AM / IP Logged

Ya I did one a couple days ago. Same as the 2005

double-secret reverse-osmosis speaker-cone-induced high-level interference distortion, Its a killer

mugpar

Copper - Posts: 100

Joined: January 28, 2003

Location: United States

Posted: December 13, 2005 at 1:15 PM / IP Logged

How come it's such a pain?

Just wondering cause I have to do one this weekend.

Thanks

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: December 13, 2005 at 4:56 PM / IP Logged

Walk in the park..

- 1 Ignition (pink/white)

- 1 Starter (yellow)

- Power at the top of the BCM or the battery.

- Parking lights (WHITE/ brown, positive) and brake in the drivers kick (WHITE/ tan)

There's your basic start..

Mike

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 13, 2005 at 4:59 PM / IP Logged

There's another starter wire that is a negative 5 wire needing a resistor. Not an easy car, but that terrible either....

Mike M2

Tech Manager

CS Dealer Services

NowYaKnow

Gold - Posts: 1,217

Joined: December 18, 2002

Posted: December 13, 2005 at 5:05 PM / IP Logged

I don't think you need the 180 ohm through the 2nd starter wire anymore. Do it if you want to I guess, but I know it works fine on the newer ones without it.. I tested this pretty thoroughly and couldn't find any use for hooking up the 2nd starter anymore. Anybody else play with this?

Mike

OhioMike1101

Silver - Posts: 343

Joined: August 22, 2004

Location: United States

Posted: December 13, 2005 at 7:50 PM / IP Logged

NowYaKnow wrote:

Mike

I did an 05 T&C yesterday

I grabbed 12 volt from IGN harness

1 IGN

1 Starter (+)

I used the 2nd Starter also with 180 resistor (-)

brake was at the brake switch

I used a combo data bypass that did locks and power sliding doors. Pretty simple except that darn airbad at the knee bolster that kept me away from the IGN harness.

autotech mobile

Member - Posts: 34

Joined: November 10, 2005

Location: United States

Posted: December 13, 2005 at 8:27 PM / IP Logged

I do tons of these for dealerships. After a few their not bad. Personaly I've found that I do have to use the 2nd start with 180ohm or vehicle won't start. As far as the air bag goes I unplug it.

Search for other posts by autotech mobile

Mike M2

Platinum - Posts: 2,652

Joined: June 29, 2005

Location: United States

Posted: December 13, 2005 at 8:59 PM / IP Logged

I've found that if you don't use the second starter it will not start always. It seems every 5th start or so....

Mike M2

Tech Manager

CS Dealer Services

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.