2005 Tacoma remote start problems

Home / the12volt's Install Bay / Car Security and Convenience / 2005 Tacoma remote start problems (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

nokia15291

Copper - Posts: 59

Joined: February 15, 2005

Posted: February 12, 2006 at 9:06 AM / IP Logged

AFter messing with this for hours yesterday I found the problem..I have a Crimestopper 2016....no factory alarm...if the lock/unlock circuits are disconnected from alarm and I lock manually truck remote starts all the time with no problem

When I lock/unlock it will not remote start and sometimes doesn't even lock/unlock.....anyone know what the damn problem is?? This truck is a PITA to hook anything up to....tried using purple and blue/white to lock and both GREEN/ black and gray to unlock....neither works

Please help!!!

mo12v

Platinum - Nominee - Posts: 2,748

This member consistently provides reliable information

Joined: September 30, 2003

Location: Afghanistan

Posted: February 12, 2006 at 10:19 AM / IP Logged

Are you using the Keysense wire?

Using the status output from the remote start to trigger this wire will disarm the factory alarm without unlocking the doors.

Don't Learn from Others Mistakes

You Might Be the One That Knows.

nokia15291

Copper - Posts: 59

Joined: February 15, 2005

Posted: February 12, 2006 at 10:21 AM / IP Logged

I don't have a factory alarm

nokia15291

Copper - Posts: 59

Joined: February 15, 2005

Posted: February 12, 2006 at 10:22 AM / IP Logged

Now that the damn unlock/lock circuit thing isn't hooked up its not remote starting again...i here the relay click no ignition or anything then it just locks and arms.

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: February 12, 2006 at 11:13 AM / IP Logged

Did you hook up the starter disable circuit & also what bypass module did you use for the Immobilizer ? In your last post you said that you disconnected the locking circuit & it still locked ? How is this possible if you disconnected this feature from the truck ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

nokia15291

Copper - Posts: 59

Joined: February 15, 2005

Posted: February 12, 2006 at 2:49 PM / IP Logged

OK...I did figure out what is going on but don't know why....

Once the truck arms and sits for about a minute it will not remote start...I don't even hear the relay inside the remote start click at all...it's like it doesnt even attempt to do anything..it just locks and thats it

I did not even hook up the starter disable circuit at all because my truck has that stupid chip in the key and wont start unless the specific keys are used.. I used the 556U for the byapss module...

Locking and unlocking works...I did hook that back up...

Really sounds to me like something is screwed up with the RS...anyone have any suggestions?

KarTuneMan

Platinum - Posts: 7,056

Joined: December 14, 2004

Location: Isle Of Man

Posted: February 12, 2006 at 3:26 PM / IP Logged

Like Mo said...if you power up the key sence GREEN/ blackNEG(-) at the ign. switch. The truck WILL start. Use the status wire to trigger it!

Crimestopper might call it ground while running

nokia15291

Copper - Posts: 59

Joined: February 15, 2005

Posted: February 12, 2006 at 3:38 PM / IP Logged

tried that too and it doesnt do anything....

My remote start doesnt turn on the ignition...nothing at all...it just locks the doors...the ignition relay doesnt click at all....I even put a key in the igntion and left it off....tried remote starting and it still didnt even try at all...

nokia15291

Copper - Posts: 59

Joined: February 15, 2005

Posted: February 12, 2006 at 4:57 PM / IP Logged

OK...check this out...just went back out to finish shoveling snow....and it remote started fine!!! but i did notice that the alarm wasnt on...turned it off and and tried remote starting again...then i actually armed the system and tried remote starting...this is when I get no response. So it appears something is messed up with the 2016 unit in my opinion...anyone else have an idea?

ky1960

Member - Posts: 17

Joined: May 22, 2004

Location: United States

Posted: February 12, 2006 at 6:18 PM / IP Logged

recheck all the connection to ensure the power work properly and ground

kvn

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.