python 5706 door locks

2014 tacoma base model. wired in my alarm no problems. added dei 524f door locks. using only the green and blue off the actuators tho. wired them into some relays like this 87 fused 12v 85/86 to fused relay 87a ground 86 alarm lock ouput 85 alarm unlock output 30 to actuators now when i stick my fuse in after i have everything wired up the actuators receive power immediately and either lock or unlock. i hit my remote unlock or lock and nothing happens. the actuators still have power, i pull the fuse out and i can hear the actuator lose power. any help? not sure what im doing wrong.

Get rid of the ground on 87a

Those relays don't sound right at all. For 5 pin relays: Pin 85 - ground Pin 86 - +12V Pin 30 - Output Pin 87a - Normally Closed Input Pin 87 - Normally Open Input What is the pinout on these actuators? I'll see if I can draft up a diagram for you. I just need to know which color does what on each actuator. The manual for the actuators should have this info. No question is stupid or not worth asking. You were once a noob, right? :)

its a 5 wire actuator but im just using the blue and green. they have a brown, white, and black but those are for central locking. also when i click the lock on my alarm one of the wires shows positive voltage not negative. then when i unlock the other wire shows the voltage. i tried to use the relay wiring diagram on this site but it wasnt working.

https://www.the12volt.com/doorlocks/page3.asp#3wp using this as a reference, if my alarm outputs are + then could i ground the (87)s instead of feeding them 12v?

https://www.the12volt.com/relays/relaydiagram49.html tried this also didnt work

The relay diagram under "Actuators / Reverse Polarity" on that page is exactly what you need. The 5706 puts out a (-) pulse, so this particular diagram is the exact one you should use. The circuit would be completely different if you have (+) outputs.No question is stupid or not worth asking. You were once a noob, right? :)

One more thing! Always make sure your (+) inputs are fused at the correct rating!No question is stupid or not worth asking. You were once a noob, right? :)

Your second link is the one for (+) outputs. It won't work for this system.No question is stupid or not worth asking. You were once a noob, right? :)

freqsounds wrote: The relay diagram under "Actuators / Reverse Polarity" on that page is exactly what you need. The 5706 puts out a (-) pulse, so this particular diagram is the exact one you should use. The circuit would be completely different if you have (+) outputs.

so if I put a dmm to the wires coming off the harness what should it read when unlocking and locking?