Ford Explorer wiring diagram.....

Home / the12volt's Install Bay / Vehicle Wiring Information & File Requests / Ford Explorer wiring diagram..... (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Warlock16

Member - Posts: 1

Joined: September 29, 2002

Location: United States

Posted: September 29, 2002 at 6:15 PM / IP Logged

Im trying to find a wiring diagram for a 94 ford explorer..... I looked on this site, but its either wrong, or just confusing.......I only see half of the colors the site says there are, and some of them, it asks for twice..... HELP!!!

Back to Top

djfearny2

Silver - Posts: 810

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 23, 2002

Location: United States

Posted: September 29, 2002 at 9:40 PM / IP Logged

try this ::::

Remote Starter Wiring Colors and Notes

Function

DTI Color

Vehicle Color

Location

Start:

Yellow

RED / LIGHT BLUE

IGNITION SWITCH HARNESS

Ignition #1:

Blue

RED / LIGHT GREEN

IGNITION SWITCH HARNESS

Ignition #2:

Green

GRAY / YELLOW (16 AWG)

IGNITION SWITCH HARNESS **

Ignition #3:

Wht/Blk

GRAY / YELLOW-2WIRES

IGNITION SWITCH HARNESS **

Accessory:

White

BLACK/ GREEN

IGNITION SWITCH HARNESS

Brake Light:

Orange

GREEN (+)

AT SWITCH ON BRAKE PEDAL BRACKET

Tach Signal:

Green

TAN / YELLOW

AT COIL (3.0L) *

Parking Lights:

Yellow

BROWN

(+) AT LIGHT SWITCH

Headlights:

Yellow

RED / YELLOW (+)

HEADLIGHT SWITCH OR BEAM SELECT SW.

OEM Alarm Disarm:

Brn/Wht

N/A

OEM Alarm Arm:

n/a

N/A

Diesel Glow Plug:

RED / Black

Clutch Bypass Wire:

n/a

Notes:

* 2.3L Tach Wire Is BLACK / YELLOW At EDIS Module. On All Explorers Except 3.0L Tach Test Connector Can Be Found On Passenger Rear Corner Of Engine Compartment Near The Blower Motor. ** See Note #211 - Ford Ignition Switch Connection Diagram.

Alarm and Keyless Entry Wiring Colors and Notes
Function	DTI Color	Vehicle Color	Location
Constant +12 Volts:	Red	2 YELLOW OR 2 GREEN	IGNITION SWITCH HARNESS
Starter Kill:	Vlt or Wht	RED / LIGHT BLUE	IGNITION SWITCH HARNESS
Ignition +12 Volts:	Orange	RED / LIGHT GREEN	IGNITION SWITCH HARNESS
Dome Lights/Superv:	Brown	BLACK/ LIGHT BLUE	(+) AT PIN SWITCH
OEM Horn:	Blue	DARK BLUE (+) OR	YELLOW/LIGHT GREEN (-) IN COLUMN
Power Lock:	Wht/Red	PINK / YELLOW	DRIVER'S KICK PANEL ***
Power Unlock:	Yel/Red	PINK/LIGHT GREEN	DRIVER'S KICK PANEL ***
Trunk Release:	Grn/Wht	N/A
Alarm Input Wire:	R/W or Gy/Bk	BLACK/ LIGHT BLUE	(+) AT PIN SWITCH
Notes:	*** Without OEM Keyless Entry See Note #203 - Reverse Polarity Door Lock Diagram, With OEM Keyless See Note #202 - Positive Pulse Door Lock Diagram.

try this all you need from this is the vehicle wire chart.

Jon

Installer/Help Technician

---coral springs florida---

mecp certification is not always needed. I have it and it has not helped me out at all. my experience out shines it.

Back to Top

ron30

Member - Posts: 1

Joined: October 03, 2002

Location: United States

Posted: October 03, 2002 at 9:31 PM / IP Logged

I need help i had a short in my 98 explorer and smoked quite a bit of wires, but there is a block that goes to the rear radio and blower does anybody know where i could get a diagram for that.

ron30

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Ford Explorer wiring diagram.....

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.