2000 Pontiac Grand Am Alarm, Remote Start, Keyless Entry Wiring

Home / the12volt's Install Bay / Vehicle Wiring / View all Pontiac Vehicles / 2000 Pontiac Grand Am

Vehicle Search	Manufacturer
Select Vehicle Manufacturer
If you do not find the vehicle information you're looking for here, please post your request here. We will NOT respond to any requests by email.

• Cruise Control Information

• Stereo Information

• View all Pontiac Vehicles

Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 2000 Pontiac Grand Am Alarm Information )

2000 Pontiac Grand Am Alarm, Remote Start, Keyless Entry Wiring Information
Constant 12V+	Red (2)	Ignition Switch Harness, Remove Radio or Instrument Cluster
Starter	Yellow	Ignition Switch Harness, Must Remove Radio or Instrument Cluster to gain access.
Ignition	Pink	Ignition Switch Harness, Remove Radio or Instrument Cluster
Ignition 2	Orange	Ignition Switch Harness, Remove Radio or Instrument Cluster
Accessory	Brown	Ignition Switch Harness, Remove Radio or Instrument Cluster
Tach	Purple/White or White	Coil
Neutral Safety Wire	Orange/Black (-)	Behind Driver's Dash left of Column
Brake Switch	Light Blue	Brake Switch
Trunk Release	Black/White (-)	Driver's Kick Panel under Dash
Trunk Pin	Orange/Black (+)	Wire in Trunk
Parking Lights	Brown (+)	Head Light Switch Harness
Head Lamp	Dark Blue (-)	And Pink Steering Column
Door Trigger	Green/Black (-) LF	Light Blue 3 Doors BCM Passenger's Dash* Diode Isolate
Door Lock	White (-)	Driver's Kick One Wire
Door Unlock	White (-)	Negative for Lock (1500 Ohm Resistor Negative Unlock)
Driver's Lock	Gray	Driver's Kick Panel
Driver's Unlock	Tan	Driver's Kick Panel
Horn Wire	Black (-)	Steering Column
Windows Up	LF=Dark Blue, RF=Blue, LR=Dark Green, RR=Light Green
Windows Down	LF=Purple, RF=Tan, LR=Purple/White, RR=Purple

• Cruise Control Information

• Stereo Information

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.