1996 Chrysler Sebring Convertible Alarm, Remote Start, Keyless Entry Wiring
Please do not copy and paste this table into your forum posts. Please copy and paste the link below instead:
( 1996 Chrysler Sebring Convertible Alarm Information )
| 1996 Chrysler Sebring Convertible Alarm, Remote Start, Keyless Entry Wiring Information |
| Constant 12V+ | Pink/Black |
Ignition Switch Harness |
| Starter |
Yellow |
Ignition Switch Harness |
| Ignition |
Blue |
Ignition Switch Harness |
| Ignition 2 |
Black/White |
Ignition Switch Harness |
| Accessory |
Black/Orange |
Ignition Switch Harness |
| Tach |
Brown/Green |
ECM under Air Cleaner, 1 Cylinder Setting |
| Neutral Safety Wire |
Black/Light Blue (-) |
Switch on Transmission |
| Brake Switch |
White/Tan |
Back of Fuse Panel. |
| Trunk Release |
Green/Black |
Driver's Kick Panel or at Switch |
| Trunk Pin |
Tan/Black (-) |
Driver's Kick Panel |
| Parking Lights |
Black/Yellow |
Rear of Fuse Panel |
| Head Lamp |
Purple/White LO |
Red/Orange (HI) at Head Light Switch |
| Factory Disarm |
Light Green/Orange + |
Back of Fuse Panel. |
| Door Trigger |
Brown/Green (-) |
Bottom of Fuse Panel |
| Door Lock |
White/Light Green |
Near Fuse Panel |
| Door Unlock |
White/Light Green |
Single Wire System |
| Horn Wire |
Black/Red (-) |
Steering Column |
| Windows Up |
LF=Light Blue, RF=Brown/White, LR=Blue/White, RR=Gray/Black |
| Windows Down |
LF=Dark Green, RF=Purple, LR=Orange, RR=Brown |
|
|
Follow the12volt.com
Friday, June 9, 2023
• Copyright © 1999-2023 the12volt.com, All Rights Reserved
• Privacy Policy & Use of Cookies
Disclaimer:
*All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please
verify all wire colors and diagrams before applying any information.
