e90 bmw evo can int bmw2 clifford 50.7x

btw, i say sketchy because youre wrapping it with aluminum foil. It would be the same deal if you were to leave it connected previously, minus the foil. give it a shot and see if it works, save yourself some bucks.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

ok guys I fixed it. One of my wires was off. the int-bmw2 and the evo-can require a wire to be hooked up to negative while running. I accidentally had to hooked to orange armed while running. I switched it to the blue negative status output and now everything works as it should

no wonder it wouldnt lock. you press lock the GWA activates = completes relay for the immobilizer, results in doors not locking. good you got it working.Ted

2nd Year Tier 1 Medical School

Still installing as a hobby...pays for groceries

Compustar Expert

No comment at this time, except I've won a £10 bet with myself that had I originally accused the OP of poor wiring I might have been flamed. ALL BMW dealers stock this key, you usually get it with a new BMW.

howie ll wrote: No comment at this time, except I've won a £10 bet with myself that had I originally accused the OP of poor wiring I might have been flamed. ALL BMW dealers stock this key, you usually get it with a new BMW.

Hey hey hey just going to throw this out there. my first two post were pictures of how I was going to wire it and nobody said that it was wrong....... but again thanks. Im going to write up a DIY for anyone using a d2d product with the evo-can and the int-bmw2

Benjimatt, I've done my silly bit, let me please give you a tip for future reference:- Read the "crib" sheets many times over. Do a check list next to the wiring, tick when you've done each colour. Test each wire you identify, look at my signature line. Verify everything before soldering. Simple rules but they work. If you can archive other installs on your vehicle from this site. Try to identify problem areas, a prime example GM vehicles with 2 ACC wires.

thanks again man Here is the correct wiring for anyone that tries to do it with this vehicle. [url]http://postimage.org/image/8ladbvm5f/full/[/url] [url]http://www.picstation.net/show-image.php?id=d101a06cafafb4c02fea31608fc4fd9e[/url] [url]http://uploadpic.org/v.php?img=Kn6V9bHpF2[/url]