boot release & universal motor.

Home / the12volt's Install Bay / Car Security and Convenience / boot release & universal motor. (

Topic Closed)

Welcome Guest :)

Members

< Prev Page < Prev Topic Next Topic >

brick_top

Member - Posts: 13

Joined: January 11, 2015

Location: United Kingdom

Posted: January 13, 2015 at 5:53 AM / IP Logged

So it's possible it may still be ok?

I thought if the dmm sees near 12v the coil in the relay will activate and keep 12v at the motor permanently?

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: January 13, 2015 at 5:54 AM / IP Logged

Yes but just in case try it.

brick_top

Member - Posts: 13

Joined: January 11, 2015

Location: United Kingdom

Posted: January 14, 2015 at 8:09 AM / IP Logged

We have an electronics guy at work who can replace the transistor so gonna take the ECU out and get him to have a butchers.

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

boot release & universal motor.

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.