the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2004 Toyota Corolla LE alarm/RS


Post ReplyPost New Topic
< Prev Topic Next Topic >
JWorm 
Platinum - Posts: 2,208
Platinum spacespace
Joined: December 11, 2002
Location: New Hampshire, United States
Posted: June 10, 2004 at 10:24 PM / IP Logged  
If you use the wires above you don't need to worry about a "child safety wire". Its only when you use the wires that come from the switch on the door, which I have never done in 6 years of installing.
shadowinfector 
Copper - Posts: 199
Copper spacespace
Joined: October 02, 2003
Posted: June 11, 2004 at 2:08 AM / IP Logged  
so i should just follow the wiring diagram??.....thanx and also do i cut the BLACK/ White wire or the BLACK / YELLOW wire for the starter kill relay???? or should i say how do i test these wires to make sure which one is the real Ignition 1 wire thanx ......
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: June 11, 2004 at 2:44 AM / IP Logged  
if youre referring to the diargam on the first page, its teh red wire thats use for "starter" kill.
you dont necessary need to check which is ignition 1 or 2. however you do need to check to see if its an ign or acc wire, cause acc is "off" when cranking, so thats the only diff about acc/igni.
Houston,TX
"The two most common elements in the universe are H+ and stupidity" (Ellison).
Page of 2

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, May 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer