98 crown vic abs light? remote start

Home / the12volt's Install Bay / Car Security and Convenience / 98 crown vic abs light? remote start (

Topic Closed)

Welcome Guest :)

Members

< Prev Topic Next Topic >

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: December 17, 2007 at 3:53 PM / IP Logged

Hi,

Just finish installing a remote start on my 98 crown vic(PI). I used the all connection per diagram on this site. The abs light only comes on if I remote start the car but, not if I manaully crank up the car. Am I missing something? Thx for any help!

Scytek 5100rs is the remote start I'm using.

soultinter

Copper - Posts: 170

Joined: January 16, 2004

Location: United States

Posted: December 17, 2007 at 4:04 PM / IP Logged

sounds like you missed an ignition or acessory wire

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: December 17, 2007 at 4:09 PM / IP Logged

Yes. I thought that too but, I have rechecked the wiring I was thinking maybe I need to relay something or something like that. Is there anyway that I can check the alarm brain and make sure its volting right?

mauri197

Copper - Posts: 80

Joined: October 24, 2006

Location: United States

Posted: December 17, 2007 at 4:53 PM / IP Logged

theres is an actual wire you are missing is your second accesory powerd up some cars are powerd up tru da accesory wires check again not all diagrams are correct

extreme1

Silver - Posts: 1,070

Joined: February 12, 2003

Location: Canada

Posted: December 17, 2007 at 4:57 PM / IP Logged

should have 3 accesory wires powered.

grey / YELLOW, BLACK/ green and pink/black.

Shaughn Murley

Install Manager, Dealer Services

Visions Electronics

Red Deer, Alberta

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: December 17, 2007 at 5:01 PM / IP Logged

Are you saying not to power up the BROWN / pink wire. Instead power the BLACK/ green?

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: December 26, 2007 at 10:46 AM / IP Logged

Hey guys,

i think i found something but i just need a little help with wiring up this relay. another site www.p71interceptor.com/ says i need to run an external relay due to high current draw will anybody help me with this pin out on the relay. i have a spdt relay. http://www.p71interceptor.com/remotestart/9802table.html

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: December 26, 2007 at 11:08 AM / IP Logged

the scytek should should be able ot handle the high current draw. if youare worried it might not be sufficiant wire up a relay like so.

85 - Ground

86 - Ignition input (+) from scytek remote start

87 - high current 12v

30 - to second Ignition wire.

the reason you are gettin airbag light, itsbecause you did not wire up your THIRD ignition

jay3000

Member - Posts: 21

Joined: October 04, 2005

Location: United States

Posted: December 26, 2007 at 11:12 AM / IP Logged

thx in advance

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

98 crown vic abs light? remote start

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.