the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

2008 chevy silverado remote start


Post ReplyPost New Topic
< Prev Topic Next Topic >
foxgt 
Member - Posts: 14
Member spacespace
Joined: December 20, 2007
Location: Connecticut, United States
Posted: January 16, 2008 at 7:14 PM / IP Logged  
Hey guys-
Installing a remote start in a 2008 Chevy Silverado (not classic).
I am having trouble getting the truck to start. Does anyone know the proper way to interface with the start wire using relays and resistors? I have read elsewhere that the start wire requires a 1300 Ohm resistor during remote start.
I do have 1605 tech document, however I do not have a XCRS relay pack. Therefore I am not sure how to connect the wires.
I am using the XK01 bypass to get around the PK3+ system.
Any help would be greatly appreciated.
Thanks
chadwa2003 
Copper - Posts: 353
Copper spacespace
Joined: January 08, 2005
Location: Canada
Posted: January 16, 2008 at 7:53 PM / IP Logged  
From the look of the xk01 diagram it doesn't do the pk3 bypass. Also
your vehicle has a hybrid style of pk3. You would need an xk06 or a pkugm2x both are available from bypasskit.com.
foxgt 
Member - Posts: 14
Member spacespace
Joined: December 20, 2007
Location: Connecticut, United States
Posted: January 16, 2008 at 8:03 PM / IP Logged  
chadwa2003 wrote:
From the look of the xk01 diagram it doesn't do the pk3 bypass. Also
your vehicle has a hybrid style of pk3. You would need an xk06 or a pkugm2x both are available from bypasskit.com.
The PK01 bypass is also listed however for this vehicle on bypasskit.com
Wouldn't this work then? We have it programmed with the GMDL6X Firmware.
Also, am i just an idiot or is the XCRS Relay pack in the Directech document 1605 just the main wiring harness off the remote start? Therefore I would just have to hook up the wires just as listed in this document, correct?
chadwa2003 
Copper - Posts: 353
Copper spacespace
Joined: January 08, 2005
Location: Canada
Posted: January 16, 2008 at 8:29 PM / IP Logged  
The wiring in that document looks to be the output wires on the xcrs what system are you installing?
foxgt 
Member - Posts: 14
Member spacespace
Joined: December 20, 2007
Location: Connecticut, United States
Posted: January 16, 2008 at 9:04 PM / IP Logged  
i am installing an autostart 1452V
autostart tech documents had me hook up two relays that essentially passed a 1300 Ohm resistance into the data starter wire. I dont have this diagram with me at the moment unfortunately
97gss 
Copper - Posts: 235
Copper spacespace
Joined: February 12, 2004
Location: United States
Posted: January 16, 2008 at 9:13 PM / IP Logged  
I've been looking for a wiring diagram for one of these for the past couple months.  Can you send one to me?
chadwa2003 
Copper - Posts: 353
Copper spacespace
Joined: January 08, 2005
Location: Canada
Posted: January 16, 2008 at 9:16 PM / IP Logged  
It looks like you would need the relays hooked up like this
85 to positve starter
86 to ground out when running
87 to 12 volts
30 to pink/black through 9.6k ohm resistor
85 to positive 2nd acc
86 to ground out when running
87 to 12 volts
30 to pink/black through 6.3k ohm resistor
That should work but i'm not a hundred percent those are the values that directechs lists
foxgt 
Member - Posts: 14
Member spacespace
Joined: December 20, 2007
Location: Connecticut, United States
Posted: January 17, 2008 at 10:19 AM / IP Logged  

back in the shop this morning...

the theft light comes on after i try to remote start, would this be a bypass issue then?  Or could it be related to the starter wire?

Velocity Motors 
Moderator - Posts: 12,488
Moderator spaceThis member has made a donation to the12volt.com. Click here for more info.spaceThis member has been recognized as an authority in Electrical Theory. Click here for more info.spaceThis member has been recognized as an authority in Fabrication. Click here for more info.spaceThis member has been recognized as an authority in Mobile Audio and Video. Click here for more info.spaceThis member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.spacespace
Joined: March 08, 2002
Location: Manitoba, Canada
Posted: January 17, 2008 at 11:42 AM / IP Logged  
This is a bypass issue with the resistance on the PINK/BLACK wire ( if you used a homemade relay pack )
Jeff
Velocity Custom Home Theater
Mobile Audio/Video Specialist
Morden, Manitoba CANADA
mbsaudio 
Copper - Posts: 80
Copper spacespace
Joined: October 17, 2002
Location: Canada
Posted: January 17, 2008 at 1:44 PM / IP Logged  
Hey guys. I,ve got one of these coming in(08 Silverado). Have you guys got wiring info for it. I hear the locks and all are hard to do. Will the XK06 do both the locks and PK3 bypass? Thanks
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Friday, March 29, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer