the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

RS addon/ no work help!


Post ReplyPost New Topic
< Prev Topic Next Topic >
thiswire 
Member - Posts: 12
Member spacespace
Joined: February 23, 2003
Posted: March 04, 2003 at 11:42 AM / IP Logged  
ill test it out, and ill repost the result
thiswire 
Member - Posts: 12
Member spacespace
Joined: February 23, 2003
Posted: March 04, 2003 at 9:50 PM / IP Logged  

i got the car to start now

can you help me find the disarm wire. it say to open like two wires so disarm. i wouldnt know where to look for. i thought it would be through the door, but unlocking using the key doesnt disarm the unit.  i thought it would be disarm through the key cylinder like the newer model accord.

this is a '96 accord

jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 04, 2003 at 9:55 PM / IP Logged  
Are you sure this is a factory alarm? Is it possible it is an aftermarket alarm?
J Rilla
Owner/Installer
thiswire 
Member - Posts: 12
Member spacespace
Joined: February 23, 2003
Posted: March 04, 2003 at 10:30 PM / IP Logged  

am positive it is a factory alarm, everytime i push lock 3x to remote start, the alarm (horn) goes off. so am thinking you have to disarm it. am not too sure about this process.

thiswire 
Member - Posts: 12
Member spacespace
Joined: February 23, 2003
Posted: March 04, 2003 at 10:32 PM / IP Logged  

like when i arm the car and try to start it with my key, alarm goes off.

jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 05, 2003 at 12:36 PM / IP Logged  
Does the alarm sound when you remote start too.
J Rilla
Owner/Installer
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: March 05, 2003 at 7:39 PM / IP Logged  
yeah the alarm sound when i remote start
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 05, 2003 at 7:44 PM / IP Logged  
I think that your alarm must be an aftermarket alarm that will not likely have a disarm wire. Try to find out what alarm was installed and from there you might be able to figure out a way around this problem. You may be able to program the alarm to ignore when the ignition is powered up. If there is a shock sensor you may need to turn down the sensitivity if that is also triggering the alarm.
J Rilla
Owner/Installer
profuse007 
Gold - Posts: 2,015
Gold spacespace
Joined: October 20, 2002
Location: Texas, United States
Posted: March 05, 2003 at 7:50 PM / IP Logged  
new SN i dont use thiswire anymore
am telling you the unit is say honda on there, its a accord LX '96 the remote is black oval with red panic button at the bottom. the diagram show that there are disarm wire. so am stuck at this point.
but i can disconnect the ignition wire off the unit. but i havent try that through.
i notice that when you put the key in, it beep and this not letting you use the remote anymore. when i disconnect that plug that goes to the beeping unit, you can use the remote again. but there are like 6 wires to that plug, you have any idea how i can bypass this.
jrilla 
Gold - Posts: 1,498
Gold spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: November 19, 2002
Location: North Dakota, United States
Posted: March 05, 2003 at 8:37 PM / IP Logged  
On all of the newer Honda alarms you need to go into the door to disarm. Does the alarm disarm when you unlock the doors with the key in the drivers door? If it does then you may be able to grab a wire in the door to disarm.
Ok wait I just looked up a 97 accord and it says that the alarm is under the passenger seat. The disarm wire is RED / blue at the a;arm unit.
I dont know if that is helpful since you seem to have found the alarm unit under the dash, unless that is actually not the alarm and just the module that makes the chime when your keys are in the ignition.
I dont have any specific info on that alarm so I am just trying to help where I can.
J Rilla
Owner/Installer
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Tuesday, July 29, 2025 • Copyright © 1999-2025 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer