the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

car wont start with key


Post ReplyPost New Topic
< Prev Topic Next Topic >
1fstls1 
Member - Posts: 17
Member spacespace
Joined: January 26, 2008
Posted: January 26, 2008 at 9:50 AM / IP Logged  
So my remote start worked fine for years then I had a light bulb on the fron corner marker go bad.  Fixed it then my car wont start with the key only with the remte start.  I have been trying to fix this for some time now.  I have tapped into the starter relay under the hood.  The car will turn over then run for 1 second then shut off with the key in the on/run position.  So sounds like a security prob.  I can push the remote start button with the starter wire from the brain unhooked and activate the relay under the hood by hand and the car will start and run.  I have unhooked the remote start and alarm and Paskey transpoder from the car and it still wont start with the key.  I have tried both keys that I have.  I am getting 12v on my yellow starter wire when the key is turned to the start pos but nothing happens.  Any one have any ideas??????  Please help
swerks 
Copper - Posts: 224
Copper spacespace
Joined: January 12, 2003
Location: Canada
Posted: January 26, 2008 at 10:58 AM / IP Logged  
what kind of car is it?
Steve Sverdahl
Swerksound Auto Electric
Red Deer Alberta
1fstls1 
Member - Posts: 17
Member spacespace
Joined: January 26, 2008
Posted: January 26, 2008 at 11:01 AM / IP Logged  
99 Camaro
1fstls1 
Member - Posts: 17
Member spacespace
Joined: January 26, 2008
Posted: January 26, 2008 at 11:10 AM / IP Logged  
Resistor is in the key and visable.  I think its paskey I
usabuilt 
Copper - Posts: 161
Copper spacespace
Joined: September 11, 2007
Location: United States
Posted: January 26, 2008 at 11:32 AM / IP Logged  
If you see a resistor in the key it is a vats system, if it wont start with the key it may be having a problem reading the key, which is a common problem.
Have you tried another key??
1fstls1 
Member - Posts: 17
Member spacespace
Joined: January 26, 2008
Posted: January 26, 2008 at 11:48 AM / IP Logged  
Yes I have two keys tried both.  This is killing me
usabuilt 
Copper - Posts: 161
Copper spacespace
Joined: September 11, 2007
Location: United States
Posted: January 26, 2008 at 11:55 AM / IP Logged  
If you know a little about electronics it not very difficult to bypass this system. do you know how to use and ohm meter?
1fstls1 
Member - Posts: 17
Member spacespace
Joined: January 26, 2008
Posted: January 26, 2008 at 11:57 AM / IP Logged  
Yes pleas tell me how more info.  I can hook up a push button switch. anything
usabuilt 
Copper - Posts: 161
Copper spacespace
Joined: September 11, 2007
Location: United States
Posted: January 26, 2008 at 12:02 PM / IP Logged  
See it you can get a reading on the resistor pellet in the key is the first step.
1fstls1 
Member - Posts: 17
Member spacespace
Joined: January 26, 2008
Posted: January 26, 2008 at 12:09 PM / IP Logged  
4.71k on one key 4.72k on the ohter.  Now what
Page of 3

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Thursday, March 28, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer