2001 honda civic, remote start

Home / the12volt's Install Bay / Car Security and Convenience / 2001 honda civic, remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: March 09, 2008 at 11:31 AM / IP Logged

i just put a remote start on my 2001 civic i used a die 556h so i did not have to buy another key everything works fine but when i start the car with the key the light on the dash that is in the shape of a key wont stop flashing any ideas? i have never used one of the 556h before.

tedmond

Gold - Posts: 4,610

This member has been recognized as an authority in Mobile Security and Convenience. Click here for more info.

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 09, 2008 at 5:37 PM / IP Logged

sounds like you didnt wire in your bypass properly OR it isnt programmed correctly. Place a key into the ignition, try to remote start. if it starts then its a bypass problem

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: March 09, 2008 at 7:10 PM / IP Logged

it starts fine with the bypass works great just when you start it with the key the keylight flashes but it still starts but the light never stops flashing????

Velocity Motors

Moderator - Posts: 12,488

This member has made a donation to the12volt.com. Click here for more info.

This member has been recognized as an authority in Electrical Theory. Click here for more info.

This member has been recognized as an authority in Fabrication. Click here for more info.

This member has been recognized as an authority in Mobile Audio and Video. Click here for more info.

Joined: March 08, 2002

Location: Manitoba, Canada

Posted: March 09, 2008 at 7:53 PM / IP Logged

Did you ground your key sense wire during remote start ?

Jeff

Velocity Custom Home Theater

Mobile Audio/Video Specialist

Morden, Manitoba CANADA

Search for other posts by Velocity Motors

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: March 09, 2008 at 8:04 PM / IP Logged

what wire is that i have a print out from code it does not say anything about it i cant get a dei sheet till i get to work in the morning?any help would be great still working on it thanks guys

tedmond

Gold - Posts: 4,610

Joined: January 06, 2007

Location: Ontario, Canada

Posted: March 09, 2008 at 9:48 PM / IP Logged

If i remember:

Key Sense - RED / WHITE @ factory alarm plug. it might be at the ignition harness as well

Connect the RED / WHITE to Keysense wire from your bypass.

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: March 09, 2008 at 10:06 PM / IP Logged

the bypass dont have one. im just gonna buy a new key and do it the old way

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: March 09, 2008 at 11:18 PM / IP Logged

I had the same issue........i was told by DEI that the wire that the instructions menions that needs to cut need to be interrupted.....what you can do is just open that wire with a relay when remote started instead of cutting it and routing it through the bypass module...Im glad i wasn't the only one who had that issue...BTW i switched from the 556h to a honda sl3 and the light went away,

Again....that same EXACT thing happened to me.

1caraudioman

Member - Posts: 33

Joined: February 04, 2005

Location: United States

Posted: March 10, 2008 at 2:14 PM / IP Logged

sl3 who makes it

enice

Silver - Posts: 857

Joined: March 05, 2006

Location: New York, United States

Posted: March 10, 2008 at 3:04 PM / IP Logged

Its made by fortin...its different wiring compared to the 556H but on the same harness. If I am not mistaken the honda sl3 would also be the same wirig as the trilogix modules(bypasskits.com).

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.