2008 mustang, clifford x-50

Home / the12volt's Install Bay / Car Security and Convenience / 2008 mustang, clifford x-50 (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page Next Page > < Prev Topic Next Topic >

08silvermustang

Member - Posts: 38

Joined: March 17, 2008

Location: Texas, United States

Posted: March 17, 2008 at 9:15 PM / IP Logged

When I switched my polaity the lights would come on when I armed the vehicle.

08 Siver Mustang Modified

Back to Top

Search for other posts by 08silvermustang

skee-weezy

Copper - Posts: 177

Joined: March 08, 2008

Location: Michigan, United States

Posted: March 17, 2008 at 9:18 PM / IP Logged

hmmmmm....... dats could be something causing your gem module to do something it ain't supposed to be doing.... such a strange issue..... i don't know what to tell ya.... but u gotta be looking in the wrong place or something.....

there can be only one.......

Back to Top

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: March 17, 2008 at 9:42 PM / IP Logged

I can't find any info on an X-50 anywhere....is that the full name of the system? How old is it or is it a newer system?

Back to Top

08silvermustang

Member - Posts: 38

Joined: March 17, 2008

Location: Texas, United States

Posted: March 17, 2008 at 9:42 PM / IP Logged

I looked all through the manual and found nothing about a domelight delay learning feature.

08 Siver Mustang Modified

Back to Top

08silvermustang

Member - Posts: 38

Joined: March 17, 2008

Location: Texas, United States

Posted: March 17, 2008 at 9:44 PM / IP Logged

Sorry is is a Clifford Matrix 50x5 and is is pretty new

08 Siver Mustang Modified

Back to Top

08silvermustang

Member - Posts: 38

Joined: March 17, 2008

Location: Texas, United States

Posted: March 17, 2008 at 9:45 PM / IP Logged

Matrix 50.5X

08 Siver Mustang Modified

Back to Top

mikvot

Gold - Posts: 1,043

Joined: December 19, 2006

Location: Missouri, United States

Posted: March 17, 2008 at 9:50 PM / IP Logged

Ok...that helps out alot. Are you using the h1/9 BLACK/ white wire to drive the relay.

Back to Top

08silvermustang

Member - Posts: 38

Joined: March 17, 2008

Location: Texas, United States

Posted: March 17, 2008 at 10:13 PM / IP Logged

The H1/9 is the (-200) ma domelight supervision output

08 Siver Mustang Modified

Back to Top

08silvermustang

Member - Posts: 38

Joined: March 17, 2008

Location: Texas, United States

Posted: March 17, 2008 at 10:14 PM / IP Logged

Yes it is being used from the alarm to drive the relay and is connected to pin 85

08 Siver Mustang Modified

Back to Top

08silvermustang

Member - Posts: 38

Joined: March 17, 2008

Location: Texas, United States

Posted: March 17, 2008 at 10:17 PM / IP Logged

At least I believe that pin 85 drives the relay, I am not to good with this relay stuff. 2008 mustang, clifford x-50 - Page 2 -- posted image.

08 Siver Mustang Modified

Back to Top

< Prev Page Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.