the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

vss and tach on 2008 chevy full size van


Post ReplyPost New Topic
< Prev Topic Next Topic >
soundguy46 
Member - Posts: 2
Member spacespace
Joined: April 19, 2008
Location: Virginia, United States
Posted: April 19, 2008 at 6:57 PM / IP Logged  

I need the location of the VSS & Tach lines for a Chevy 2008 Express , 6.0 , Vortec

I was able to use an Audiovox CCS-100 to pull the pedal perfectly ,with no binding,  and feel this will work as well as the expensive cruise units, if I can find these lines. I did find what I believe is the VSS on the 10 pin black connector ( GREEN / WHITE ) under the steering column , but no luck on the Tach .

The Audiovox needs both to work.

Any help ?

Rick 

Rick
spookiestylez 
Silver - Posts: 531
Silver spaceThis member has made a donation to the12volt.com. Click here for more info.spacespace
Joined: September 23, 2005
Location: Virginia, United States
Posted: April 27, 2008 at 11:29 PM / IP Logged  
vss is yellow/black (AC) pin 49 in black pug at the pcm
tach is white (-) in black plug near drivers shock tower
directechs dosent list any info for this car yet
and im not at work to check wire magic.
the info above it got from audiovox website
www.techservices.audiovox.com, its free to make your own account too
good luck
sS
rtfm
zziggy 
Member - Posts: 20
Member spacespace
Joined: January 14, 2006
Location: United States
Posted: April 28, 2008 at 2:59 PM / IP Logged  

The 2008 Chevy van is an EASY install using the 9003 kit

Also works on the silverado/sierra

No need for that cumbersome pedal pull fiasco waiting to happen.

soundguy46 
Member - Posts: 2
Member spacespace
Joined: April 19, 2008
Location: Virginia, United States
Posted: May 02, 2008 at 10:26 PM / IP Logged  

Many thanks to both of you for replying. I have pulled the Audiovox off, and the Rostra 2003 should be here this coming week. It is indeed a very simple install for that cruise.

Thanks again

Rick ( Soundguy )    

Rick
gus1 
Gold - Posts: 1,013
Gold spacespace
Joined: October 15, 2003
Location: Canada
Posted: May 07, 2008 at 7:59 AM / IP Logged  
Pedal pull is just not the way to go on a DBW vehicle...... there are better solutions. And safer solutions. You are on the better track with the Rostra piece, by far.
Wherever I go, that is where I end up......
kaseym 
Member - Posts: 1
Member spacespace
Joined: July 30, 2008
Location: Florida, United States
Posted: July 30, 2008 at 2:28 PM / IP Logged  
The link "using the 9003 kit" does not seem to be working. I recently got a '08 Chevy van 4.8l that I would like to put cruise control on. I searched and found the mfg but haven't found a dealer. Any help? Any special tools needed for the install?
Thanks
zziggy 
Member - Posts: 20
Member spacespace
Joined: January 14, 2006
Location: United States
Posted: October 16, 2008 at 9:26 PM / IP Logged  

The 9003 is an easy install 4.8L, 5.3L, 6.0L

The link should work. if not PM me.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, January 26, 2022 • Copyright © 1999-2022 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer