08 dodge charger wiring diagram

Home / the12volt's Install Bay / Car Security and Convenience / 08 dodge charger wiring diagram (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

mrcllusb

Copper - Posts: 489

Joined: September 06, 2005

Location: Georgia, United States

Posted: May 22, 2008 at 12:20 PM / IP Logged

Does anyone have this diagram?

"ole blake"

Back to Top

hydroz_23

Copper - Posts: 97

Joined: November 20, 2006

Location: United States

Posted: May 22, 2008 at 10:54 PM / IP Logged

same as 07 except for ignition is quite a bit different. you will need to remove ignition, remove circuit board and solder 3 to 4 wires to the board. you can use a xk06 for rs, xko7 for locks and a pku-ch2 for transponder. or the best way is idatalink. i have done 2 dozen of the new chryslers the idatalink is the way to go. there are several threads on doing the new chryslers

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

08 dodge charger wiring diagram

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.