spacer spacer spacer spacer

95 Chevy Z71

Post ReplyPost New Topic
< Prev Topic Next Topic >
Member - Posts: 1
Member spacespace
Joined: June 16, 2009
Posted: June 16, 2009 at 8:11 AM / IP Logged  
when u took the black trim of the side of your truck was it glued on or did it have clips holding it on, did you have to get bady work after it
Member - Posts: 30
Member spacespace
Joined: April 17, 2008
Location: Texas, United States
Posted: June 17, 2009 at 2:55 PM / IP Logged  
The black trim on the side of the truck was glued on, getting it off was not hard. All you have to do is slowly pull the trim off, the glue will probably stick tho the truck and to get that off you will need to get some good adhesive remover, i used 3M adhesive remover and it worked really well. Just be patiant and let the adhesive remover do the work, then just get a rag and wipe it down you might have to scrub pretty hard in some places, it may take all day to get it off.  oh and a little carb cleaner works to get some of the really stubburn spots.  let me know if you have any other questions, i wil try to help as best i can.
Page of 5

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Follow Follow on Facebook
Thursday, April 18, 2024 • Copyright © 1999-2024, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo spacer spacer spacer
Top spacer spacer