lock/ unlock wire color 07 infiniti g35

Home / the12volt's Install Bay / Car Security and Convenience / lock/ unlock wire color 07 infiniti g35 (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

infiniti2007

Copper - Posts: 67

Joined: August 21, 2007

Location: Canada

Posted: August 18, 2008 at 9:05 AM / IP Logged

Hi, could someone tells me, what is the colors wires for lock/unlock for 2007 infiniti g35x ( sedan)?, and exactly where they located? Thanks

hhh

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 18, 2008 at 10:17 AM / IP Logged

	Power Unlock		BLUE/WHITE		(-)		AT SWITCH IN DRIVERS DOOR
	PowerLock		RED / WHITE		(-)		AT SWITCH IN DRIVERS DOOR

infiniti2007

Copper - Posts: 67

Joined: August 21, 2007

Location: Canada

Posted: August 18, 2008 at 2:59 PM / IP Logged

Are they inside the door panel?. Do I have to remove the door panel and run the wires from door to driver side kick?. Thanks .

hhh

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: August 18, 2008 at 3:11 PM / IP Logged

www.idatalink.com

Select what kind of car you have, and there are two different products you could use to do a remote start on that car.

On either product, click "Guides." The guide will show you the two empty pins at the BCM where you can add wires for lock and unlock.

infiniti2007

Copper - Posts: 67

Joined: August 21, 2007

Location: Canada

Posted: August 18, 2008 at 3:17 PM / IP Logged

Yes, I already have hooked up like that, but it does not works when you armed ( Locked) and let it sit for half hour or so, then if you disarmed ( unlocked) it only disarmed the vehicle but does not unlock the door.

hhh

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 18, 2008 at 3:21 PM / IP Logged

I would have to assume that you need to run wires into the door. If they were available in the kick panel, they would have told us to look there.

moonliter

Copper - Posts: 322

Joined: February 28, 2007

Location: Canada

Posted: August 18, 2008 at 4:10 PM / IP Logged

Would it work if you set it up as double pulse unlock ?

i am an idiot

Platinum - Posts: 13,670

Joined: September 21, 2006

Location: Louisiana, United States

Posted: August 18, 2008 at 4:30 PM / IP Logged

I can only imagine that you are trying to use the factory keyless to trigger a remote start. I am not sure about the Nissan/Infiniti system, but on a Toyota, when the vehicle is running, the keyless no longer works. So yes unlock unlock should start the vehicle. Only problem with that is you may not be able to lock the doors back while the vehicle is running.

To check, start the car and try to lock or unlock the doors with the keyfob.

infiniti2007

Copper - Posts: 67

Joined: August 21, 2007

Location: Canada

Posted: August 18, 2008 at 8:18 PM / IP Logged

I got everythings worked perfectly, even to start the vehicle with the remote starter, lock and unlock worked great. The thing is, right now is summer time. If you armed the vehicle, it will armed and locked the vehicle, after while you came back , you try to disarmed the car , it will disarmed the car without unlocked the doors. But if you use the remote starter to starts the car, then lock and unlock will work normally. It only DOES NOT work if you armed the vehicle and after awhile you disarmed the vehicle WITHOUT use remote starter, It will not unlock the doors.

hhh

KPierson

Platinum - Posts: 3,527

Joined: April 14, 2005

Location: Ohio, United States

Posted: August 18, 2008 at 8:57 PM / IP Logged

You can five wire the door lock actuators at the BCM. This would be a band aide to cover up some sort of problem, but it would work.

Kevin Pierson

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.