2000 silverado remote start?

Hello everybody recently i have been putting a CrimeStopper RS-1304 remote start and keyless entry unit in my truck i am using the GM 555L bypass module for passlock 2 i had everything wired in and the truck started however the keyless entry never worked.. my brother in law thought he new how to program my remote to get the keyless entry to work and now to say the least the truck wont even start.. i rechecked all my connections and still nothing.. sometimes when i start the truck with my key and then turn it off the truck will remote start right after the key is taken out however if you wait 5 minutes the truck will start then die.. IM IN A BIND!! help me please RoOoLeR@gmail.com Thanks

brcidd wrote: Did you tap into the light blue and white wires?  for lock and unlock?

that was a quick edit.

brcidd wrote: Did you tap into the light blue and white wires?  for lock and unlock?

were at are those wires located? also does the crime stopper connect to them or does the 555l Module?

The Crimestopper uses those- with a relay for each since they are positive energizeBrcidd - Engineer That Does Remote Starter Installs on the side.

i will be sure to check into the lock/unlock wires..does anyone know were at on the truck they located? also any ideas on why the truck wont stay running?

thanks for the help i will try this weekend.. how do you set up a relay for the lock and unlock wires? i have them connect to the crimestopper but how do i relay it?

you will need 2 relays one for lock one for unlock. your output wires from the remote start will go to pin 85, pins 86 and 87 will go to +12 volts and pin 30 will connect to the light blue and dark blue in the vehicle

ok still in a bind here...i rechecked all the connections on the 555l and there all good...i also unplugged it and let it sit and it still didnt work?? any other things to try?