members only newest auto wiring informati

Home / the12volt's Install Bay / Car Security and Convenience / members only newest auto wiring informati (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

wiring fool

Member - Posts: 7

Joined: November 19, 2008

Location: North Dakota, United States

Posted: November 19, 2008 at 10:59 PM / IP Logged

how about information between members for the newest autos being released wiring information that can't be found because the vehicles have just been released and the information trail isn't out yet thanks a million

eieiohztztzt

mikvot

Gold - Posts: 1,043

This member has made a donation to the12volt.com. Click here for more info.

Joined: December 19, 2006

Location: Missouri, United States

Posted: November 19, 2008 at 11:34 PM / IP Logged

All you have to do is post a year, make , and model.....you have some of the most knowlegable installers in the US, and the UK ( howie). Heck, we'll even help if you're not a "member"

wiring fool

Member - Posts: 7

Joined: November 19, 2008

Location: North Dakota, United States

Posted: November 19, 2008 at 11:45 PM / IP Logged

2009 f150 no info from remote start company yet maybe in 2 weeks

eieiohztztzt

mikvot

Gold - Posts: 1,043

Joined: December 19, 2006

Location: Missouri, United States

Posted: November 19, 2008 at 11:59 PM / IP Logged

I've a done a remote start, and a couple of alarms on 09 f150s off their info.

i am an idiot

Platinum - Posts: 13,670

This member consistently provides reliable information

Joined: September 21, 2006

Location: Louisiana, United States

Posted: November 20, 2008 at 5:01 AM / IP Logged

Battery VIOLET/RED (+) IGNITION SWITCH

Ignition 1 WHITE/ ORANGE (+) IGNITION SWITCH

Accessory 1 VIOLET/GREEN (+) IGNITION SWITCH

Starter 1 BLUE/WHITE (+) IGNITION SWITCH

Key Sense BLUE/GRAY (+) IGNITION SWITCH

Parking Lights VIOLET/WHITE (+) SJB CONNECTOR C2280E PIN 9

Brake Lights VIOLET/WHITE (+) AT BRAKE SWITCH

Horn BLUE/WHITE (-) STEERING COULMN HARNESS

Chris Luongo

Platinum - Posts: 3,746

Joined: May 21, 2002

Location: Massachusetts, United States

Posted: November 20, 2008 at 6:23 AM / IP Logged

You might also want to joint the Installer Mailing List. Lots of good conversation going back and forth there.

I think if you just google "installer mailing list" you will find it.

howie ll

Pot Metal - Posts: 16,466

Joined: January 09, 2007

Location: United Kingdom

Posted: November 20, 2008 at 2:49 PM / IP Logged

Chris, do you still contribute (heavilly) to DEI's forum? I haven't been there in ages.

preussen

Member - Posts: 1

Joined: November 28, 2008

Location: Alberta, Canada

Posted: November 28, 2008 at 2:23 AM / IP Logged

I'll add to the listed colors with some other info:

door lock- grey / YELLOW- (-) polarity- driver's kick or SJB C2280c pin 17

door unlock- violet/grey- (-) polarity - driver's kick or SJB C2280c pin 4

dome light sense- grey/violet - (+) polarity - SJB C2280a pin 9

dome light on - GREEN/ blue - (-) polarity - interior dimmer switch

The listed location for the (+) park light wire as SJB C2280E will work, but I found an easier place was to tie in at the big wire connector, underhood, near the brake booster. This one is attached to the inner fender, and I found it nice to just run the park light wire with the hood switch wire and make the connection here instead. It is still violet/white at this point. For those who are unfamiliar, the SJB in this truck is in the RH kick panel, which is a pain in the ass. I did find the lock/unlock wires in the LH kick area, but installing a Ford factory remote start with security requires you to run 6 wires over to the RH kick anyway, so I just run the lock wires there with the rest. Other than going across to the other side, these are cake to install. Hope this helps a bit more.

Slamminsubz

Member - Posts: 12

Joined: February 12, 2005

Location: Saint Helena

Posted: January 07, 2009 at 6:16 PM / IP Logged

Im getting conflicting information about the main wires for the 09 F150.

Audiovox is saying to get them at the PSC/ECU MODULE

Boa(DEI) is saying at the SJB

And in this thread is Ignition Harness.

Any idea what the best route is because if i can grab it all at the SJB, ill do all my connections there instead. Thanks.

Slamminsubz

Member - Posts: 12

Joined: February 12, 2005

Location: Saint Helena

Posted: January 07, 2009 at 6:19 PM / IP Logged

actually i made a mistake, audiovox says to use the Ignition harness too. So far just DEI says the SJB for all the connections, but it seems strange to grab them from that,

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.