the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

08 chevy silverado diesel


Post ReplyPost New Topic
< Prev Topic Next Topic >
p01110101 
Member - Posts: 43
Member spacespace
Joined: January 12, 2004
Posted: November 21, 2008 at 5:48 PM / IP Logged  
I am using an ADS-AL-CA with and autopage rs-900 lcd and cannot seem to get the tach signal over rs232 or thru the tach output wire on the ADS-AL-CA. any ideas, also having trouble with starter wire and i can't seem to find the glow plug wire. but aside from all that everything else works.
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 21, 2008 at 7:02 PM / IP Logged  
If you are connecting the two together thru the DBI link that is your problem. I have done dozens of them and the tach signal never seems to work on GM products. To cure this, i hard wire the RS to the Idatalink and it works every time....
Mike M2
Tech Manager
CS Dealer Services
p01110101 
Member - Posts: 43
Member spacespace
Joined: January 12, 2004
Posted: November 22, 2008 at 4:34 PM / IP Logged  
thanks, any ideas for the starter/glowplug i have a 1300ohm resister on the stater wire and i can't seem to get it to work/ any ideas where there might be a glow plug wire?
ckeeler 
Gold - Posts: 1,461
Gold spacespace
Joined: June 20, 2008
Location: New Mexico, United States
Posted: November 22, 2008 at 8:06 PM / IP Logged  
you CANNOT use the glow plug wire on this vehicle even if you were able to find it. it  is done through data. if you must use it rather than through the module programing, use a DEI 528T for the wait to start.
p01110101 
Member - Posts: 43
Member spacespace
Joined: January 12, 2004
Posted: November 23, 2008 at 1:10 AM / IP Logged  
i don't need a 528t the autopage has a built in delay. any ideas for starter?
Mike M2 
Platinum - Posts: 2,652
Platinum spacespace
Joined: June 29, 2005
Location: United States
Posted: November 23, 2008 at 6:30 PM / IP Logged  
What are you asking? What issue do you have with the starter wire?
Mike M2
Tech Manager
CS Dealer Services
p01110101 
Member - Posts: 43
Member spacespace
Joined: January 12, 2004
Posted: November 23, 2008 at 7:14 PM / IP Logged  
never mind i figured it out, this is our first time using autopages RS's so figures we would run into a couple of issues. thanks for the help.
Nothing last's like the temporary.

Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Wednesday, May 1, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer