the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
icon

01 pathfinder remote start problem


Post ReplyPost New Topic
< Prev Topic Next Topic >
richid 
Member - Posts: 3
Member spacespace
Joined: December 20, 2008
Posted: December 20, 2008 at 8:14 AM / IP Logged  

Hi,

2001 Nissan Pathfinder LE - all stock - new remote start.

After reading through all of the great info here I was able to install a new remote starter, bypass, relays, diodes, etc. and it works great. The only problem is that the new fob unlock sets off the factory alarm. If I start it first, it works fine - just unlocking sets it off. So it seems that the car is not seeing the 'disarm' as part of the unlock.

I did have trouble locating the wires for the lock/unlock on the 'smart' module as the factory manual nor the aftermarket ones list the pin locations. Did I pick the wrong unlock wire ?

Thanks,

-Rich

sinkhole 
Member - Posts: 13
Member spacespace
Joined: December 18, 2008
Location: Connecticut, United States
Posted: December 20, 2008 at 8:21 AM / IP Logged  
What remote start are you using and what by-pass module?
richid 
Member - Posts: 3
Member spacespace
Joined: December 20, 2008
Posted: December 21, 2008 at 8:20 AM / IP Logged  

Here they are :

Commando EZ-2500 with BYPASS TBKIII

Thanks,

-Rich

prdjr165 
Copper - Posts: 293
Copper spacespace
Joined: October 31, 2002
Location: Illinois, United States
Posted: December 21, 2008 at 8:27 AM / IP Logged  
did you set it for double pulse on unlock?
jinstall 
Copper - Posts: 67
Copper spacespace
Joined: December 17, 2008
Location: Ontario, Canada
Posted: December 21, 2008 at 10:48 AM / IP Logged  
hey man check for a brown wire at the security module. staub includes that as a note on disarm. doesn't say where the security module is but those one's are usually pretty easy to find.
jinstall 
Copper - Posts: 67
Copper spacespace
Joined: December 17, 2008
Location: Ontario, Canada
Posted: December 21, 2008 at 10:49 AM / IP Logged  
if you get that all done and your arm doesn't work staub also has a note that rearm is a ltGREEN/ red at the same module. hope this works!
richid 
Member - Posts: 3
Member spacespace
Joined: December 20, 2008
Posted: December 23, 2008 at 11:18 AM / IP Logged  

Thanks - I found the security module to tap the wires, there are two GREEN/ red - I'll check for the brown wire.

It is set for double pulse - it unlocks fine, just sets off the alarm.


Sorry, you can NOT post a reply.
This topic is closed.

  Printable version Printable version Post ReplyPost New Topic
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

  •  
Search the12volt.com
Follow the12volt.com Follow the12volt.com on Facebook
Monday, May 6, 2024 • Copyright © 1999-2024 the12volt.com, All Rights Reserved Privacy Policy & Use of Cookies
Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

Secured by Sectigo
the12volt.com spacer
the12volt.com spacer
the12volt.com spacer
Support the12volt.com
Top
the12volt.com spacer
the12volt.com spacer