programming a new remote to a code alarm

Home / the12volt's Install Bay / Car Security and Convenience / programming a new remote to a code alarm (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Topic Next Topic >

Fosgate3

Copper - Posts: 328

This member has made a donation to the12volt.com. Click here for more info.

Joined: January 29, 2004

Location: Louisiana, United States

Posted: December 30, 2008 at 7:58 AM / IP Logged

I have a Code Alarm, CA-670 and my LCD remote got wet and died. I have a replacement remote but I can't find instructions in the manuals for reprogramming it. Can anyone assist?

i think a wire's loose somewhere...

Back to Top

advanced

Copper - Posts: 207

Joined: January 13, 2003

Location: Massachusetts, United States

Posted: December 30, 2008 at 10:04 AM / IP Logged

This should help you.

https://www.the12volt.com/installbay/downloads.asp?srch=all&term=670

Good Enough Isn't!

Back to Top

Fosgate3

Copper - Posts: 328

Joined: January 29, 2004

Location: Louisiana, United States

Posted: December 30, 2008 at 11:01 AM / IP Logged

I called Code. I may have overlooked it but I couldn't find it in the manuals. I looked there first. The Code support person advised to keep the driver's door open, turn the key to "on", press and hold the valet for 15secs until the alarm chirps 3 times. It's supposed to be in "learning mode" at that point. Press the lock button of the new LCD remote and it will chirp once. That's the deal. Thanks for the links to the manuals though.

i think a wire's loose somewhere...

Back to Top

advanced

Copper - Posts: 207

Joined: January 13, 2003

Location: Massachusetts, United States

Posted: December 30, 2008 at 3:48 PM / IP Logged

The transmitter programming procedure is on the top of page 8 of the Install Guide, on that link that I gave you.

You got it done - that's what counts.

Good Enough Isn't!

Back to Top

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

programming a new remote to a code alarm

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.