sidewinder 6500esp

Home / the12volt's Install Bay / Car Security and Convenience / sidewinder 6500esp (

Topic Closed)

Welcome Guest :)

Members

Search

Register

Login

< Prev Page < Prev Topic Next Topic >

DeathsJester12V

Silver - Posts: 352

Joined: July 22, 2002

Location: United States

Posted: March 25, 2003 at 11:12 AM / IP Logged

how do you have the remote start hooked up..meaning..do you have it on Voltage Check, or Engine Check. Engine Check is the Default setting on the Sidewinder 6500 ESP. For that the Tach wire needs to be hooked up...

Back to Top

Search for other posts by DeathsJester12V

rlowe75

Member - Posts: 24

Joined: March 18, 2003

Location: United States

Posted: March 25, 2003 at 1:43 PM / IP Logged

i have the the tach wire hooked up.

It's all fun and games till someone looses an eye.

Back to Top

rlowe75

Member - Posts: 24

Joined: March 18, 2003

Location: United States

Posted: March 25, 2003 at 1:43 PM / IP Logged

it does not explain why it quit working.

It's all fun and games till someone looses an eye.

Back to Top

DeathsJester12V

Silver - Posts: 352

Joined: July 22, 2002

Location: United States

Posted: March 25, 2003 at 4:53 PM / IP Logged

alright dude....here's what I would do....take it into a shop, and have them switch out the brain module....

Đễẳ†ђş 12\/ Ĵęśŧē®™

Back to Top

x6369x

Copper - Posts: 108

Joined: November 10, 2002

Location: United States

Posted: March 27, 2003 at 8:26 PM / IP Logged

Lemme try and help.

If you're getting the 4 flashes on the shutdown diagnostics, check the BLACK/ white of the 6 pin harness for a propper ground.

If you're getting the 3 flashes on the shutdown diagnostics, check the violet/white of the 6 pin harness. It should go to the tach wire of the vehicle.

Oddly enough, both triggers are in the same harness. I would also check the harness.

My last ditch effort would be to delete all the transmitters using channel 10 of the Transmitter/Receiver Learn Routine. This will set the alarm to default settings. Maybe the alarm just hiccuped???

Otherwise, I'd send in the unit for service.

Friends Don't Let Friends Bump Stock.

Back to Top

rlowe75

Member - Posts: 24

Joined: March 18, 2003

Location: United States

Posted: April 22, 2003 at 8:19 AM / IP Logged

well after getting moved into my new house and learning that I am going to be a new father I decided to take a few minuted to myself and go out in the garage and go over my whole install one more time before blowing the truck up. and low and behold what do my wandering eyes see....a wire that is not suppose to be used being used. I activated the remote start and it actually works now. boy am I an idiot. thanks for all the help.

It's all fun and games till someone looses an eye.

Back to Top

< Prev Page

Sorry, you can NOT post a reply.
This topic is closed.

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.

sidewinder 6500esp

Sorry, you can NOT post a reply.This topic is closed.

Sorry, you can NOT post a reply.
This topic is closed.