07 hyundai santa fe python 1400 rs

What did you connect the thick RED / white (from the relay pack) of the Python to?

I was told no hyundai santa fes need bypasses. i did not connect the RED / white or the second red. I was following these recommendations which didnt mention the second red or the RED / white "You will need all of the heavy guage relay wires (Red, green, purple, pink, pink/wht, and orange). Harness H1 you will need: red, black, and white. H2: light GREEN/ black. H3: BLACK/ wht, PURPLE / wht, and brown. Door locks (green & blue), antenna, and ribbon harness."Green and Pink/White are still confusing me to

got it workingHooked up the other red and RED / white to 12v constant.Disconected green all togeather. works like a dream. Now i just have to fix the hood latch that I broke in the process

Hey all, My starter starts great. Here are my few issues.1: I could not get the parking light function to work, the audiovox diagram is telling me about a wire that isn't there. Anyone have done this car before and know? I hooked it up to the switch arm and it left the light on all the time, even with the car off and locked.2. If I remote start the car, sometimes the unlock function doesn't work, not even on my factory keyfob. I have to shut the car down and then unlock it. Any ideas?ThanksDave

Thanks for the reply, I went by those wires, and there aren't any of those colors on the gray harness plug in the fuse box. What does K\E mean, sorry but I don't follow the door lock explanation. They locked and unlocked fine tonight, it's wierd.