optimax modules won’t flash

i find that i cannot re-flash most of the Optimax modules i have in stock. I have the Bootloader 2 but when i plug in an Optimax module PKALL they dont see the module and just say no module connected. This happens on both computers i use at work.  My XK modules flash fine.. i am running Express VIP 3.1 with the latest firmwares (02/20/09)    i have also tried to flash with the older VIP 2.9....

when i plug in a DLPKGM it sees the module and says version 1.0 but when i look for updated firmware it says the only firmware is 1.0, yet the bypass kit website says it is now at version 3.3

anyone else have this issue?        any ideas?

does you computer see the xkloader 2

when you program the

xk pieces is that with the original loader or with your new xkloader

do you have a fortin programmer

if you do give it a try as both of those pieces are fortins

also make sure the programmer has the latest updates

Kevin,

PKALL not recognized by the Optimax software: The PKALL needs to be connected to the black connector at its back to be flashed, not at the front white like every others.

DLPKGM versions: I just tried myself with the same result. I’ll look with the bypass team why this happen.

Regards,

PatG

on xpresskits site it does show firmware updates

i would think that there is a software problem