06 nissan frontier and viper 350hv

one will be positive unlock and negative lock. So when you push the lock button it will send out a negative pulse on one wire and a positive on the other. So just look at the wiring diagram and use the colour that says negative lock next to it for lock and the other one for unlock. Soory I forget what wire actually does what on this system

so i got everything to work...except the park lights...it doesnt blink when i unlock/lock...i followed the wiring diagram but no luck at all...any ideas?

All you have to do is connect it should be a white wire coming off the viper to the red parking light wire in the truck. Just make sure the jumper is in the correct position when looking at the brain the main connector will be on the left. The jumper must be connected to the middle pin and right pin. Which is the default setting. Did you test your parking light wire in the car? Also confirm that your fuse on your white parking light wire is not blown

thanks chadwa. ill check that today. the jumper is in the right position and the fuses are good. ill have to find the red wire though.i know i can trace it back from the bay to the kickpanel. thanks again. ill let you know what happens.