using 611t to create a ground when armed

Sorry I read your post wrong that's why we've been fighting to standardise, such as 86 ALWAYS being coil pos, when you said door trigger I wrongly read it as door LOCK trigger.  I would have used door CONTACT.  Still think  involving door lock is stupid, eg wasn't there an issue a year or so ago with all GM product having  the same keys?   It probably only takes a well placed screwdriver to have your door lock away.

ckeeler wrote: i like to purchase the sockets that they fit into and just solder and heat shrink my wires to the socket so that if a relay ever has to be changed, just pop it out and put in a new one. (the sockets have the same type of pins that you will have to solder to as the relay however) just like an IC socket.

Where can i find these sockets at? Does digikey sell them also?

phree_refill wrote: Where can i find these sockets at? Does digikey sell them also?

yes they do. they may list it as a related product that you can click on when you look up the part, or it may even show them or at least list the part numbers on the data sheets for the relay you are looking at. try pulling up a relay you are interested in, and then check the data sheet.