marksman m6a remote start

Home / the12volt's Install Bay / Car Security and Convenience / marksman m6a remote start (

Topic Closed)

Welcome Guest :)

Members

Next Page > < Prev Topic Next Topic >

mjkurth72

Member - Posts: 6

Joined: March 08, 2009

Location: Alabama, United States

Posted: March 08, 2009 at 8:01 PM / IP Logged

installed a marksman m6a remote start on a 1998 Chevy Silverado, everything worked and then the led on the module stays lit, will not let me program it or anything. Door locks and unlocks, but remote start will not engage. checked all wires and connections. Is there a way to reset module or what does the led mean when it is o all the time (did not stay on at all times before) please help

thanks

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 08, 2009 at 8:44 PM / IP Logged

More than likely, it's in valet mode.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

mjkurth72

Member - Posts: 6

Joined: March 08, 2009

Location: Alabama, United States

Posted: March 08, 2009 at 8:47 PM / IP Logged

how do you get it out of valet mode, dont know that much that is why I ask

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 08, 2009 at 8:51 PM / IP Logged

The owner's manual should provide you with that information.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

mjkurth72

Member - Posts: 6

Joined: March 08, 2009

Location: Alabama, United States

Posted: March 08, 2009 at 10:25 PM / IP Logged

does not say in manual

securinu

Silver - Posts: 772

This member has made a donation to the12volt.com. Click here for more info.

Joined: September 15, 2002

Location: United States

Posted: March 08, 2009 at 10:53 PM / IP Logged

did you ground the BLACK/ white wire???

Joe O'Byrne

Owner / Installer

mjkurth72

Member - Posts: 6

Joined: March 08, 2009

Location: Alabama, United States

Posted: March 08, 2009 at 11:19 PM / IP Logged

yes everything was working and then it gave me a solid led light on the module, now only door locks work no remote start

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 09, 2009 at 1:44 AM / IP Logged

mjkurth72 wrote:

how do you get it out of valet mode, dont know that much that is why I ask

Flip the valet switch to the opposite position.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

mjkurth72

Member - Posts: 6

Joined: March 08, 2009

Location: Alabama, United States

Posted: March 09, 2009 at 6:01 AM / IP Logged

there is no valet switch on this model, remote start worked fine and now only door locks work, led only was on when you engaged the unit now it stays on all the time. need to reset the unit dont know how to do this

loneranger

Copper - Posts: 572

Joined: December 28, 2008

Posted: March 09, 2009 at 10:20 AM / IP Logged

According to this manual on page 27, there is a valet switch.

Ideal - cmon dude, add to topics in a useful manner, not stuff that is obvious.

Story - Phzzzt! Hey, what happened?! ... Isn't it obvious?

Moral - Never dismiss the obvious.

Next Page >

Printable version

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot delete your posts in this forum
You cannot edit your posts in this forum
You cannot create polls in this forum
You cannot vote in polls in this forum

Search the12volt.com

Follow the12volt.com

Disclaimer: *All information on this site ( the12volt.com ) is provided "as is" without any warranty of any kind, either expressed or implied, including but not limited to fitness for a particular use. Any user assumes the entire risk as to the accuracy and use of this information. Please verify all wire colors and diagrams before applying any information.